Eastablish A Serial Communication - Intermec EasyLAN User Manual

Establish a Serial Communication
• Select the type of fi rmware (IPL or Fingerprint), port, and baud
rate in the drop-down list boxes. If you do not know the baud rate
in Fingerprint, select "Don't know" and the wizard will check it
automatically.
• If you have selected IPL, or if you have selected Fingerprint and
checked the Advanced box, you must enter the exact parameters.
To read the communication setup, press the <i> key on the printer's
keyboard, also see the User's Guide of the printer.
Intermec EasyLAN Network Setup—User's Guide
Chapter 2—Running the EasyLAN Network Setup
9