Advertisement
Installation
Mounting on Verkada ACC-MNT-11 (2/3)
For a solid material like wood or metal,
drill 1/8 inch pilot holes. Drive mounting
screws directly into the pilot holes using
hole pattern A of the junction box.
Feed Ethernet cable through the center of
the junction box before fully securing it to
the mounting surface.
Leave enough slack to safely handle the
camera during cable gland installation.
For drywall, plaster or masonry, separate
wall anchors may be required.
Align mounting features on the Junction
Box Adapter with the mounting pegs on
the inside of the junction box utilizing hole
pattern B. Insert 4 M4x8, Phillips pan head
machine screws.
Attach the junction box cover and
camera mount plate to the junction box
cover adapter with 4 M4x8, Phillips Pan
head machine screws.
14
Verkada Inc. 405 E 4th Ave, San Mateo, CA 94401
sales@verkada.com
All specifications are subject to change without notice
Copyright © Verkada Inc. All rights reserved.
Advertisement
