Advertisement
PRECAUTIONS
• To avoid electrical shock, do not open the case of this product.
• Operate this product using only the supplied AC Power supply.
• Do not overload electrical outlets or extension cords; this can result in fire or electric
shock.
• Keep this product away from strong magnetic fields.
• Do not expose this product in direct sunlight or strong reflected rays.
• Refer servicing to qualified personnel only.
• Do not change or modify this product, the warranty will be voided.
FEATURES
• Weatherproof (IP67)
• 1/3" Sony Super HAD CCD
• High Resolution 560 TV Lines
• Rugged Steel Construction
• Total 22 Infrared LEDs with a CDS sensor
• Up to 80' IR range (depends on scene reflection)
• DC Auto Iris Vari-focal Lens (4-9mm)
• Attached Universal Mounting Bracket and 100' cable
• DC15V Power Source
INSTALLATION
1. Attach the mounting bracket base ring① to the wall or ceiling, wherever you want to
install the camera. Locate a wall stud or ceiling joist and secure the bracket base ring
using the supplied screws. Attach the mounting bracket② to the base ring① and
secure them using the supplied screws.
2. Lock the mounting bracket with the locking ring③.
3. Turn the pivot locking screw④ with the provided hex-head wrench counter-
clockwise to set the desired angle of camera toward objects and turn it clockwise to
secure. It can be used for wall-mount or ceiling-mount application depending on
setting this pivot locking screw.
4. Loosen the locking screw⑤ with the provided hex-head wrench and turn the camera
clockwise or counter-clockwise to upright images on the screen and turn it clockwise
to secure.
5. Connect the one end of 100' cable (supplied) to the Din jack of 5' cable attached to
the camera. Make sure that two arrows on the top of them should be aimed at each
Advertisement
