Advertisement
PRECAUTIONS
• To avoid electrical shock, do not open the case of this product.
• Operate this product using only the supplied AC Power supply.
• Do not overload electrical outlets or extension cords; this can result in fire or electric
shock.
• Keep this product away from strong magnetic fields.
• Do not expose this product in direct sunlight or strong reflected rays.
• Refer servicing to qualified personnel only.
• Do not change or modify this product, the warranty will be voided.
FEATURES
• Vandal/Weather Resistant Dome Camera
• 1/3" Sony Super HAD CCD
• 420 TV Lines of Resolution
• Rugged Steel Construction
• Total 11 Infrared LEDs with a CDS sensor
• 30' IR range (depends on scene reflection)
• DC12V Power Source
INSTALLATION
1. Loosen the four locking screws① with provided hex-head wrench and remove the
dome④.
2. Loosen the two locking screws② with a "+"driver (not included) and then set the
desired angle of camera toward objects by moving the camera up or down.
3. Attach the mounting base to the wall or ceiling, wherever you want to install the
camera. Locate a wall stud or ceiling joist and secure the mounting base using the
supplied screws③. Attach the dome④ to the mounting base with a camera and secure
them turning the four locking screws① with provided hex-head wrench clockwise.
4. Connect the one end of 60' cable (BNC/DC plug) to the BNC/DC jack of 3.3'
cable⑤ attached to the camera. Connect the other end (BNC/DC jack) of cable⑥ to
the video devices such as DVR, monitor/TV. Plug the provided AC adapter to the DC
jack (red: ⑦) of the end of 60' cable.
Advertisement
