Table of Contents
Advertisement
It is advisable to place the Perfect Hold Deli
Case as close as possible to its permanent
location prior to uncrating.
Each Broaster Perfect Hold Deli Case is
wood crated for protection during ship-
ment. Remove the top part of the crate first.
Next, remove the side crating panels. The
glass side panels, heating elements and
rear doors are wrapped in cardboard and
packed separately and must be installed.
LIST OF PARTS
Base Mounted Unit:
HDM-4
HDM-6
1
1
Base
1
1
Perfect Hold™ deli case
2
2
Side glasses
2
3
Long pan dividers (with holes)
6
8
Short pan dividers
2
2
Back doors
6
10
Display lamps
1
1
Operator Manual
0
1
Small Heating Element
1
1
Large Heating Element
Countertop Unit:
HDM-4
HDM-6 DESCRIPTION
1
1
Perfect Hold™ deli case
2
2
Side glasses
2
3
Long pan dividers (with holes)
6
8
Short pan dividers
2
2
Back doors
6
10
Display lamps
1
1
Operator Manual
0
1
Small Heating Element
1
1
Large Heating Element
3 - UNCRATING
DESCRIPTION
Manual #16287 9/05
After the top panel and side panels have
been removed, it is necessary to remove the
warmer from the skid which it was shipped
on. Cut the strapping to free the unit from
the skid.
INSTALLATION OF LOOSE PARTS
All glass on this unit is certified tempered
safety glass. The edges of this type of glass
are the most vulnerable to fracture. The
glass should be handled with extreme care
when installing.
Note: Glass panels should never be placed
with edges coming in contact with concrete
or other hard surfaces. The glass may chip
or break.
Clean all components and unit surfaces.
See CLEANING.
Side Glass:
1. Remove side cover (A) by pulling out-
ward on tab (B) then slide cover toward
the rear of the unit.
Continued:
3 - 1
Advertisement
Table of Contents
