Advertisement
Quick Links
INSTALLATION INSTRUCTIONS
©2022 Kohler Co.
CAUTION: Risk of personal injury. Verify that
the shower arm is adequately supported before
installing the infusion device.
Cover the drain with a towel to avoid losing small
parts.
Follow all local plumbing and building codes.
1
□ Using an adjustable wrench, remove the
showerhead.
2
□ Wrap the provided sealant tape around the shower
arm threads twice clockwise.
□ Verify the orientation of the Sprig adapter piece
(shown) and tighten using the provided wrench.
3
□ Push the infusion device fully onto the adapter.
□ Tighten the setscrews.
4
□ Wrap the provided sealant tape around threads
twice clockwise.
□ Reinstall the showerhead.
5
□ Turn ON the water and check for leaks.
1486211-2-B
Advertisement
Related Manuals for Kohler sprig
Summary of Contents for Kohler sprig
- Page 1 □ Reinstall the showerhead. □ Wrap the provided sealant tape around the shower arm threads twice clockwise. □ Verify the orientation of the Sprig adapter piece (shown) and tighten using the provided wrench. □ Turn ON the water and check for leaks.
- Page 2 Warranty □ Rotate the pod counter-clockwise to release. This product is covered under the Sprig by □ Press the top of the pod until the pod clicks to reseal. KOHLER Lifetime Limited Warranty, found at ®...