Advertisement
IMPORTANT! READ CAREFULLY THESE INSTRUCTIONS AND
KEEP THEM IN A SAFE PLACE FOR FUTURE REFERENCE!
USER MANUAL FOR
BABY WALKER 4 in 1
PARTY
This
baby walker is manufactured in accordance
with the Product Safety Directive 2001/95/EU of the European Parliament
and the Council, to European standard EN 1273 "Child use and care articles.
Baby walking frames. Safety requirements and test methods" as well as
Consumer Protection Law from national legislation.
Advertisement
Table of Contents
Related Manuals for Chipolino PARTY
Summary of Contents for Chipolino PARTY
- Page 1 IMPORTANT! READ CAREFULLY THESE INSTRUCTIONS AND KEEP THEM IN A SAFE PLACE FOR FUTURE REFERENCE! USER MANUAL FOR BABY WALKER 4 in 1 PARTY This baby walker is manufactured in accordance with the Product Safety Directive 2001/95/EU of the European Parliament and the Council, to European standard EN 1273 “Child use and care articles.
- Page 2 TO SECURE THE SAFE USE OF THIS PRODUCT AND PREVENT BABY FROM INJURIES, FOLLOW THE WARNINGS, GUIDELINES AND RECOMMENDATIONS IN THIS MANUAL! CAUTION! NEVER LEAVE THE CHILD IN BABY WALKER WITHOUT SUPERVISION! CAUTION! BABY WALKER IS NOT FOR CHILDREN, WHO CAN WALK ALONE! ...
- Page 3 MAIN FEATURES Baby walker 4 in 1 PARTY encourages the child attempts to make and refine its first steps and helps the toddler to develop its balance and coordination. Bright colors and sounds of the tray with toys stimulate the creativity of the child, develop hearing and vision.
- Page 4 NOTE: Product is supplied partially assembled. To complete the assembly and disassembly you may need to use a screwdriver (it is not included in set). The assembly actions are numbered from 1 to 6. Use the descriptions below in combination with the figure of the same number. 1 – OPEN THE FRAME WITH BASIS AND UPPER TRAY. Pull upwards with both hands the tray until you hear a click sound and frame is fixed in uppest position. 2 – FRONT WHEELS, REAR WHEELS AND STOPPERS ASSEMBLY. Install front wheels, rear wheels and stoppers by pressing them in the corresponding openings in the base. WARNING! NEVER USE THE WALKER WIHTOUT WHEELS OR STOPPERS! 3 – ASSEMBLY OF SEAT AND HANDLE TO FRAME. Insert the pins in the corresponding holes in the top tray, as shown.
- Page 5 FUNCTIONS • Height adjustment of upper tray in 3 positions. • Front rotating at 360° wheels. • Rear straight moving wheels. • Tray with toys. • Push handle with two height positions • Push toy – push handle is adjusted in the lowest position and child pushes the walker. • Activity play center. • Rocking function. front wheels screws “click” stoppers rear wheel front pull up pull up wheels the tray the tray rear wheel Seat Seat handle button button...
- Page 6 Musical toys plastic tightener plastic tightener...
- Page 7 CARE AND MAINTENANCE Periodically check the good working order of all parts. Any broken or damaged parts must be immediately repaired or replaced. Do not pour water over the walker. Clean with damp soft towel and a neutral liquid. The fabric seat and feet mat must be hand washed at 30°. Never use abrasive, bleach or spirit based detergents. Discontinue using the walker if you find damage or non-working function. After each cleaning, leave the walker to fully dry and only after that use it or store it. Do not store in areas with hot air or close to heat sources to avoid deforming. Store the product in a clean and dry place. Do not leave it to environmental effects – sun, rain, moisture or harsh temperature fluctuations! Do not put heavy items on the walker during transportation or storing.
- Page 8 CHIPOLINO LTD., 1 Goliamokonarsko Shosse Str, Plovdiv, BULGARIA; www.chipolino.com...
Need help?
Do you have a question about the PARTY and is the answer not in the manual?
Questions and answers