Advertisement
QUICK START GUIDE
Step 12 - Controller Shunt and Contactor Settings - if battery connections are
present
Details in Pulsar Edge Controller Family Product Manual.
Shunt size and contactor option label is on the side of the Battery Lug Landing assembly.
Verify settings as specified in Site Engineering Instructions.
Verify Battery Shunt Settings:
A.
Controller Display - Follow the menu path; Menu > Configuration > Shunt Monitors > Built In - edit as necessary.
B.
Web Pages or EasyView2 - Select the Settings Tab > Shunts > Plant Shunt - edit as necessary.
Verify Disconnect Contactor Settings - if disconnect contactor is present:
A.
Controller Display - Follow the menu path; Menu > Configuration > Contactor Interfaces > Built In - type "LVBD" or
"LVLD"; and Menu > Configuration > Disconnects > LVBD or LVBD 1—3 - edit as necessary
B.
Web Pages or EasyView2 - Select the Settings Tab > Contactors > DCNC1 - type "LVBD"; Select Edit button, edit
settings as necessary
Reference Documents
These documents are available at
Document
Title
CC848815341
Pulsar Edge Controller Family Product Manual
Infinity S Power System (NE-S) Brochure and Ordering Guide
Slimline Power System (SPS) Brochure and Ordering Guide
Cabinet Power System (CP) Brochure and Ordering Guide
Page 8
© 2021 ABB. All rights reserved.
Shunt Size and Disconnect
Contactor option label
abbpowerconversion.com
Advertisement
