Operation - I-GO S20 Owner's Manual

PRE-RIDE SAFETY CHECK
Get to know the feel of your scooter and its capabilities. We recommend that you perform a safety check before
each use to make sure your scooter operates smoothly and safely.
Perform the following inspections prior to using your scooter:
 Check the condition of the tires. Make sure they are not damaged or excessively worn.
 Check all electrical connections. Make sure they are tight and not corroded.
 Check all lead connections. Make sure they are secured properly.
 Check the brakes to ensure they operate properly.
 Check the battery condition meter to ensure the battery is fully charged.
PRE-RIDE ADJUSTMENTS AND CHECKS
 Is the seat secured into place?
 Is your proposed path clear of people, pets, and obstacles?
 Have you planned your route to avoid adverse terrain and as many inclines as possible?
NOTE: Use caution when operating your scooter on delicate surfaces as scuffi ng and/or marking may occur.
TURNING ASSIST SENSOR
Your scooter is equipped with a turning assist sensor that
helps control the speed of your scooter when negotiating
turns. The turning assist sensor switch is engaged at the
factory and can be disengaged using a toggle switch. See
fi gure 11.
NOTE: The turning assist sensor toggle switch is easily
accessible when the scooter is folded and separated.
To disengage/re-engage the turning assist sensor:
1. Locate the turning assist sensor toggle switch. See
fi gure 11.
2. Press the turning assist sensor toggle switch toward the
plastic on the scooter to disengage.
3. Press the turning assist sensor toggle switch toward the
scooter base to re-engage.
BEFORE GETTING ONTO YOUR SCOOTER
 Have you fully charged the battery? See III. "Batteries and Charging."
 Ensure the tiller release lever is in the latched position. See V. "Disassembly/Assembly and Folding/Unfolding."
 Ensure the air temperature is between 14°F/-10°C to 122°F/50°C (optimal range is 59°F/15°C to 77°F/25°C).
16
I V. O P E R AT I O N
IDENTIFICATION KEY
1. Turning Assist Sensor Toggle Switch
Figure 11. Turning Assist Sensor
i-Go™