Foster Multideck FMPRO900NG Service Manual page 5

1
Display Icons and Buttons
Icon 1
Standby
Pressing button 4 for 3 seconds will turn the unit on or into standby. When in standby, the display will show 'oFF' . When operating normally, the display will show the
internal temperature.
Set Point
To display the appliance Set Point, with the display showing the temperature, press and hold button 1.
To amend the Set Point press and hold button 1, then while keeping button 1 pressed use buttons 2 and 3 to set the desired value.
If the Set Point cannot be adjusted to the value required please contact your authorised Foster dealer for advice
When button 1 is released the new value will be stored automatically.
Multidecks - Service Manuall
Operating Instructions
+1.5
Button 1 Button 2
Icon
1 Alarm Warning
Thermostat Output
2
Active
3 Fan Output Active
4 Defrost Output Active
5 2nd Parameter Set Active
°C
Button 3
Button
1 Info & Set Point
Manual Defrost & Decrease
2
Value
Increase Value / Lights
3
On - Off
4 Standby / Exit
Icon 2
Icon 3
Icon 4
Icon 5
Button 4
5