Nobles Anser Specifications

Vacuum System
Airflow at orifice
Vacuum motor amps
Vacuum motor horsepower
Vacuum motor stages
Vacuum motor type
Vacuum motor voltage
Vacuum motor watts
Waterlift at sealed orifice
Recovery System
Recovery tank wet capacity
Vacuum hose length
Pump System
Solution pump amps
Solution pump pressure
Solution pump voltage
Solution pump watts
Solution Delivery System
Solution capacity
Solution flow rate
Solution hose description
Solution hose length
Solution pump watts
Spray jets count
Power System
Power cord length
Power cord type
Power consumption amps
Power consumption voltage
Power consumption watts
Dimensions / Weight / Accessories
Length
Width
Height
Net weight
Accessories
Warranty
Peripheral discharge, bypass; 4.8 in / 122 mm diameter; recognized by UL.
SJTO; recognized by UL and CSA; non-marking safety yellow w/grounded plug.
4 in / 100 mm clear hand tool and 8 ft / 2.4 m vacuum and solution hoses
3 years / 2500 hrs on parts and labor (excluding batteries).
10 years on rotationally-molded polyethylene tanks.
Nobles | 701 N. Lilac Drive | P.O. Box 1452 | Minneapolis MN 55440-1452 | 800.553.8033 | www.nobles.com | nobles@tennantco.com
Anser
™

specifications

80 cfm / 2.26 m /h
3
7 A
1.12 hp
2 stage
120 V
840 watts
71 in / 1803.4 mm
1.5 gal / 5.67 L
8 ft / 2.43 m
1.25 A
30 psi / 207 kPa
120 V
150 watts
2 gal / 7.57 L
0.25 gpm / 0.95 L / min
Clear braided hose
8 ft / 2.43 m
150 watts
1 jet
25 ft / 7.62 m
8.25 A
120 V
990 watts
21 in / 553.4 mm
7.75 in / 196.8 mm
17.5 in / 444.5 mm
18 lb / 8.2 kg
Specifications subject to change without notice. REV 8.14.06