Mazda 2 HYBRID Owner's Manual page 424

Lubrication system
Oil capacity (Drain and refill
*
[Reference ])
With filter 3.6 L
Without filter 3.3 L
*
: The engine oil capacity is a reference
quantity to be used when changing
the engine oil. Warm up the engine
and turn off the hybrid system, wait
more than 5 minutes, and check the
oil level on the dipstick.
Engine oil selection
Gasoline Engine ⎯
Oil grade:
0W-8: JASO GLV-1
0W-16:
API grade SN "Resource-Conserv-
ing" or SN PLUS "Resource-Con-
serving" multigrade engine oil
0W-20, 5W-30:
API grade SL "Energy-Conserving",
SM "Energy-Conserving", SN
"Resource-Conserving" or SN
PLUS "Resource-Conserving"; or
ILSAC multigrade engine oil
Recommended viscosity (SAE):
8-1. Specifications
Preferred
Temperature range anticipated
before next oil change
SAE 0W-8 is filled into your Mazda
vehicle at manufacturing, and the
best choice for good fuel economy
and good starting in cold weather. If
SAE 0W-8 oil is not available, SAE
0W-16 or 0W-20 oil may be used.
However, it should be replaced with
SAE 0W-8 at the next oil change.
Oil viscosity (0W-8 is explained
here as an example):
• The 0W in 0W-8 indicates the
characteristic of the oil which
allows cold startability. Oils with a
lower value before the W allow
for easier starting of the engine
in cold weather.
• The 8 in 0W-8 indicates the vis-
cosity characteristic of the oil
when the oil is at high tempera-
ture. An oil with a higher viscos-
ity (one with a higher value) may
be better suited if the vehicle is
operated at high speeds, or
423
8