Mazda 2 HYBRID Owner's Manual page 244

WARNING
• If the surrounding area of a sensor
is scratched or dented, or part of
them has become disconnected.
Do not disassemble the sensor.
Do not modify the sensor or sur-
rounding area on the rear bumper.
If a sensor or the rear bumper
needs to be removed/installed or
replaced, contact any authorized
Mazda retailer or Mazda authorized
repairer, or any reliable repairer.
Do not paint the rear bumper any
color other than an official Mazda
color.
Blind Spot Monitor operation
Vehicles that can be detected by the Blind Spot Monitor
The Blind Spot Monitor uses rear side radar sensors to detect the following
vehicles traveling in adjacent lanes and advises the driver of the presence
of such vehicles via the indicators on the outside rear view mirrors.
Vehicles that are traveling in areas that are not visible using the outside
rear view mirrors (the blind spots)
Vehicles that are approaching rapidly from behind in areas that are not
visible using the outside rear view mirrors (the blind spots)
4-5. Using the driving support systems
Turning the Blind Spot Moni-
tor on/off
Use the meter control switches to
turn on/off the function.
1
Press
or
of the meter control switch to
select
2
Press
or
of the meter control switch to
select
/ (vertical display)
/ (horizontal display)
.
/ (vertical display)
/ (horizontal display)
and then press
243
.
4