Mazda 2 HYBRID Owner's Manual page 414

WARNING
Make sure each jumper cable is
connected to the correct terminal
and that it is not unintentionally in
contact with any other than the
intended terminal.
Do not allow the other end of the
jumper cable connected to the "+"
terminal to come into contact with
any other parts or metal surfaces in
the area, such as brackets or
unpainted metal.
Do not allow the + and - clamps of
the jumper cables to come into con-
tact with each other.
Do not smoke, use matches, ciga-
rette lighters or allow open flame
near the 12-volt battery.
12-volt battery precautions
The 12-volt battery contains poison-
ous and corrosive acidic electrolyte,
while related parts contain lead and
lead compounds. Observe the follow-
ing precautions when handling the
12-volt battery:
When working with the 12-volt bat-
tery, always wear safety glasses
and take care not to allow any bat-
tery fluids (acid) to come into con-
tact with skin, clothing or the vehicle
body.
Do not lean over the 12-volt battery.
In the event that battery fluid comes
into contact with the skin or eyes,
immediately wash the affected area
with water and seek medical atten-
tion. Place a wet sponge or cloth
over the affected area until medical
attention can be received.
Always wash your hands after han-
dling the 12-volt battery support,
terminals, and other battery-related
parts.
7-2. Steps to take in an emergency
Do not allow children near the 12-
volt battery.
After recharging the 12-volt bat-
tery
Have the 12-volt battery inspected at
any authorized Mazda retailer or
Mazda authorized repairer, or any
reliable repairer as soon as possible.
If the 12-volt battery is deteriorating,
continued use may cause the 12-volt
battery to emit a malodorous gas,
which may be detrimental to the
health of passengers.
When replacing the 12-volt bat-
tery
For information regarding 12-volt
battery replacement, contact any
authorized Mazda retailer or Mazda
authorized repairer, or any reliable
repairer.
After replacing, securely attach the
exhaust hose and exhaust hole
plug to the exhaust hole of the
replaced 12-volt battery. If not prop-
erly installed, gases (hydrogen)
may leak into the vehicle interior,
and there is the possible danger of
the gas igniting and exploding.
413
7