Mazda 2 HYBRID Owner's Manual page 358

Rear
License plate light
Rear turn signal lights (bulb
type)
Lights that need to be
replaced by any authorized
Mazda retailer or Mazda autho-
rized repairer, or any reliable
repairer
Headlights (LED type)
Front fog lights (LED type)
Front position lights (LED type)
Front turn signal lights (LED
type)
Daytime running lights
Side turn signal lights
Tail lights
Stop lights
Back-up light
Rear fog light
Rear turn signal lights (LED type)
High mounted stoplight
LED light bulbs
The lights other than the following lights
each consist of a number of LEDs. If any
of the LEDs burn out, take your vehicle
to any authorized Mazda retailer or
6-3. Do-it-yourself maintenance
Mazda authorized repairer, or any reli-
able repairer to have the light replaced.
Headlights (bulb type)
Front position lights (bulb type)
Front turn signal lights (bulb type)
Front fog lights (bulb type)
Rear turn signal lights (bulb type)
License plate light
Condensation build-up on the
inside of the lens
Temporary condensation build-up on the
inside of the headlight lens does not
indicate a malfunction. Contact any
authorized Mazda retailer or Mazda
authorized repairer, or any reliable
repairer for more information in the fol-
lowing situations:
Large drops of water have built up on
the inside of the lens.
Water has built up inside the head-
light.
When replacing light bulbs
→P.356
Replacing light bulbs
Headlights (bulb type)
1
Unplug the connector.
357
6