Mazda 2006 RX-8 Service Highlights

Mazda 2006 RX-8 Service Highlights

2006 mazda rx-8
Hide thumbs Also See for 2006 RX-8:
Table of Contents

Advertisement

2006
Mazda
RX-8
Service
Highlights
FOREWORD
This manual explains components, system
operations and functions for the Mazda RX-8.
For proper repair and maintenance, a thorough
familiarization with this manual is important,
and it should always be kept in a handy place
for quick and easy reference.
All the contents of this manual, including
drawings and specifications, are the latest
available at the time of printing.
As modifications affecting repair or
maintenance occur, relevant information
supplementary to this volume will be made
available at Mazda dealers.
This manual should be kept up-to-date.
Mazda Motor Corporation reserves the right to
alter the specifications and contents of this
manual without obligation or advance notice.
All rights reserved. No part of this book may be
reproduced or used in any form or by any
means, electronic or mechanical—including
photocopying and recording and the use of any
kind of information storage and retrieval
system—without permission in writing.
Mazda Motor Corporation
HIROSHIMA, JAPAN
APPLICATION:
This manual is applicable to vehicles
beginning with the Vehicle Identification
Numbers (VIN), and related materials shown
on the following page.
CONTENTS

GENERAL INFORMATION

ENGINE
SUSPENSION
DRIVELINE/AXLE
BRAKES
TRANSMISSION/TRANSAXLE
STEERING
HEATER, VENTILATION &
AIR CONDITIONING (HVAC)
RESTRAINTS
BODY & ACCESSORIES
© 2005 Mazda Motor Corporation
PRINTED IN U.S.A., OCTOBER 2005
Form No. 3409–1U–05J
Part No. 9999–95–102F–06
Title
Section
00
01
02
03
04
05
06
07
08
09

Advertisement

Table of Contents
loading

Summary of Contents for Mazda 2006 RX-8

  • Page 1: General Information

    SUSPENSION DRIVELINE/AXLE FOREWORD This manual explains components, system BRAKES operations and functions for the Mazda RX-8. TRANSMISSION/TRANSAXLE For proper repair and maintenance, a thorough familiarization with this manual is important, and it should always be kept in a handy place STEERING for quick and easy reference.
  • Page 2 Material Name MNAO Part No. Mazda Material No. 2004 Mazda RX-8 Service Highlights 9999–95–102F–04 3378–1U–03C 2005 Mazda3, Mazda MX-5 Miata/MX-5, MAZDASPEED MX-5, 9999–95–MODL–05 3400–1U–04H Mazda MPV, Mazda RX-8 Service Highlights 1995, 1996, 1997, 1998, 1999, 2000 OBD-II Service Highlights 9999–95–OBD2–00 3344–1U–99K...
  • Page 3 Engine 3= 13B-High power Body style 7= Coupe 1=Driver, Passenger Airbag, Restraint system Side Airbag, Curtain Airbag Carline, series FE= Mazda RX-8 World manufacturer identification JM1= Mazda/passenger car EHU000ZW8008 End Of Sie VEHICLE IDENTIFICATION NUMBER (VIN) EHU000000000106 JM1 FE173*6# 200001—...
  • Page 4 GENERAL INFORMATION UNITS EHU000000000103 Electrical current A (ampere) Electric power W (watt) Electric resistance ohm Electric voltage V (volt) mm (millimeter) Length in (inch) kPa (kilo pascal) Negative pressure mmHg (millimeters of mercury) inHg (inches of mercury) kPa (kilo pascal) kgf/cm (kilogram force per square Positive pressure...
  • Page 5 • In accordance with new regulations, SAE (Society of Automotive Engineers) standard names and abbreviations are now used in this manual. The table below lists the names and abbreviations that have been used in Mazda manuals up to now and their SAE equivalents.
  • Page 7 2006 Mazda RX-8 Service Highlights (3409–1U–05J) ENGINE SECTION 01–00 Toc of SCT OUTLINE ....01-00 INTAKE-AIR SYSTEM ..01-13 ON-BOARD DIAGNOSTIC .
  • Page 8 2006 Mazda RX-8 Service Highlights (3409–1U–05J) OUTLINE ENGINE SPECIFICATIONS EHU010002000103 Specification 2006MY Mazda RX-8 2005MY Mazda RX-8 Item 13B-MSP 13B-MSP 13B-MSP 13B-MSP (Standard (High (Standard (High power) power) power) power) MECHANICAL ← Engine type Rotary ← Rotor arrangement and number In-line 2-rotor, longitudinal ←...
  • Page 9 OUTLINE Specification 2006MY Mazda RX-8 2005MY Mazda RX-8 Item 13B-MSP 13B-MSP 13B-MSP 13B-MSP (Standard (High (Standard (High power) power) power) power) ← Type Electronic Cooling fan No.1: 5, ← Cooling fan Number of blades 01–00 Cooling fan No.2: 7 ←...
  • Page 10 OUTLINE Specification 2006MY Mazda RX-8 2005MY Mazda RX-8 Item 13B-MSP 13B-MSP 13B-MSP 13B-MSP (Standard (High (Standard (High power) power) power) power) CONTROL SYSTEM ← Neutral switch (MT) ON/OFF ← CPP switch (MT) ON/OFF ← SSV switch ON/OFF ← APV position sensor –...
  • Page 11: Table Of Contents

    ON-BOARD DIAGNOSTIC 01–02 ON-BOARD DIAGNOSTIC ON-BOARD DIAGNOSTIC OUTLINE . . . 01–02–1 OBD-II Diagnostic Trouble Code Features ......01–02–1 (Mode 03) .
  • Page 12: On-Board Diagnostic

    ON-BOARD DIAGNOSTIC ON-BOARD DIAGNOSTIC WIRING DIAGRAM EHU010200000107 FUEL PUMP RELAY STARTER RELAY START FUEL PUMP SPEED CONTROL RELAY MAIN RELAY FUEL PUMP RESISTOR BATTERY FUEL INJECTOR (FP) IGNITION RELAY FUEL INJECTOR (FS) DRIVE-BY-WIRE RELAY FUEL INJECTOR (RP) FUEL INJECTOR (RS) CPP SWITCH * FUEL INJECTOR (FP2) * NEUTRAL SWITCH *...
  • Page 13 ON-BOARD DIAGNOSTIC ECT SENSOR VFAD SOLENOID VALVE * MAF SENSOR VDI SOLENOID VALVE 01–02 SSV SOLENOID VALVE IAT SENSOR PURGE SOLENOID VALVE BARO SENSOR AIR SOLENOID VALVE AIR PUMP RELAY AIR PUMP APP SENSOR NO.1 GENERATOR A/C AMPLIFIER NO.2 THROTTLE BODY A/C RELAY TP SENSOR NO.1...
  • Page 14: Diagnostic Test Mode

    ON-BOARD DIAGNOSTIC DIAGNOSTIC TEST MODE EHU010200000102 • The diagnostic test mode is essentially carried over from that of the 2005 MY except for following. — To meet OBD-II regulations, modes 02, 03, and 06 have been changed. Diagnostic test mode Item Mode 01 Sending diagnostic data (PID data monitor/On-board system readiness test)
  • Page 15: Obd-Ii Diagnostic Trouble Code (Mode 03)

    ON-BOARD DIAGNOSTIC 2006 MY 2005 MY Full names Unit Commanded Equivalence Ratio — Relative Throttle Position °C Ambient air temperature Absolute Throttle Position No.2 Accelerator Pedal Position No.3 Accelerator Pedal Position No.4 01–02 Commanded Throttle Actuator Control Meaning of fuel system loop status •...
  • Page 16 ON-BOARD DIAGNOSTIC DTC No. Monitor Self -test Memory Condition function 2006 MY 2005 MY item type ← × P0139 Rear HO2S circuit slow response HO2S C, R ← × P0171 System too lean Fuel system C, R ← × P0172 System too rich Fuel system C, R...
  • Page 17 ON-BOARD DIAGNOSTIC DTC No. Monitor Self -test Memory Condition function 2006 MY 2005 MY item type Metering oil pump control circuit high flow side ← × P1687 C, R problem Metering oil pump control circuit initial check ← × P1688 C, R problem ←...
  • Page 18: Obd-Ii Diagnostic Monitoring System Test Results (Mode 06)

    ON-BOARD DIAGNOSTIC DTC No. Monitor Self -test Memory Condition function 2006 MY 2005 MY item type ← × P2502 Charging system voltage problem Other C, R ← × P2503 Charging system voltage low Other C, R ← × P2504 Charging system voltage high Other C, R : Indicates the applicable item in the On-Board System Readiness Test as defined by CARB.
  • Page 19: Koeo/Koer Self-Test

    ON-BOARD DIAGNOSTIC P0134 Front HO2S no activity detected • The PCM monitors the front HO2S element impedance when the following conditions are met. If the front HO2S element impedance is 50 ohms or more, the PCM determines that front HO2S is not activated. MONITORING CONDITIONS —...
  • Page 20 ON-BOARD DIAGNOSTIC DTC No. Test condition Condition 2006 MY 2005 MY KOEO KOER ← P0133 Front HO2S circuit slow response — — × P0134 — Front HO2S no activity detected — P0137 — Rear HO2S circuit low input — — ←...
  • Page 21 2006 Mazda RX-8 Service Highlights (3409–1U–05J) ON-BOARD DIAGNOSTIC DTC No. Test condition Condition 2006 MY 2005 MY KOEO KOER ← P2006 APV motor control driver IC problem — — ← × × P2009 APV motor control circuit low ← ×...
  • Page 22: Pid/Data Monitor And Record

    2006 Mazda RX-8 Service Highlights (3409–1U–05J) ON-BOARD DIAGNOSTIC PID/DATA MONITOR AND RECORD EHU010200000105 • Differences between the 2006 MY and 2005 MY PID/DATA monitor items are shown below. PID/DATA monitor item table —: Not applicable Item Definition Unit/Condition PCM terminal...
  • Page 23 ON-BOARD DIAGNOSTIC Item Definition Unit/Condition PCM terminal 2006 MY 2005 MY ← °C °F ← Input voltage from IAT sensor ← INGEAR In gear On/Off — ← Idle validation Idle/Off Idle 1J, 1M ← ° KNOCKR Spark retard value to prevent knocking 01–02 Indicates EVAP System leak detection pump ←...
  • Page 24: Simulation Test

    ON-BOARD DIAGNOSTIC End Of Sie SIMULATION TEST EHU010200000106 • Differences between the 2006 MY and 2005 MY simulation items are shown below. Simulation item table ×: Applicable —: Not applicable Item Test condition Applicable component Unit/condition PCM terminal 2006 MY 2005 MY KOEO KOER...
  • Page 25 2006 Mazda RX-8 Service Highlights (3409–1U–05J) INTAKE-AIR SYSTEM 01–13 INTAKE-AIR SYSTEM INTAKE-AIR SYSTEM DIAGRAM ..01–13–1 INTAKE-AIR SYSTEM HOSE ROUTING DIAGRAM ....01–13–3...
  • Page 26 2006 Mazda RX-8 Service Highlights (3409–1U–05J) INTAKE-AIR SYSTEM Applied VIN (assumed): JM1 FE173*6# 200012— End Of Sie JM1 FE17N*6# 200012— TO CHARCOAL CANISTER AIR SOLENOID CATCH TANK SOLENOID VFAD VALVE VALVE THROTTLE VDI SOLENOID VALVE VALVE TO METERING OIL NOZZLE...
  • Page 27 2006 Mazda RX-8 Service Highlights (3409–1U–05J) INTAKE-AIR SYSTEM INTAKE-AIR SYSTEM HOSE ROUTING DIAGRAM EHU011300000102 Applied VIN (assumed): JM1 FE173*6# 200001—JM1 FE173*6# 200011 JM1 FE17N*6# 200001—JM1 FE17N*6# 200011 VDI ACTUATOR SSV ACTUATOR 01–13 AIR SOLENOID INTAKE MANIFOLD VALVE METERING OIL NOZZLE...
  • Page 28 2006 Mazda RX-8 Service Highlights (3409–1U–05J) INTAKE-AIR SYSTEM Applied VIN (assumed): JM1 FE173*6# 200012— End Of Sie JM1 FE17N*6# 200012— VDI ACTUATOR SSV ACTUATOR AIR SOLENOID INTAKE MANIFOLD VALVE METERING OIL NOZZLE EXTENSION MANIFOLD (UPPER) PURGE SOLENOID VALVE AIR PUMP...
  • Page 29: Automatic Transmission

    TRANSMISSION/TRANSAXLE SECTION Toc of SCT OUTLINE ....05-00 AUTOMATIC ON-BOARD DIAGNOSTIC TRANSMISSION [SJ6A-EL] ....05-02 [SJ6A-EL] .
  • Page 30 OUTLINE TRANSMISSION/TRANSAXLE SPECIFICATIONS EHU050000000106 Automatic Transmission Item 2005MY RX-8 2006MY RX-8 ← Transmission type RC4A-EL SJ6A-EL ← 2.785 3.538 ← 1.545 2.060 ← 1.000 1.404 ← Gear ratio 0.694 1.000 — — 0.713 — — 0.582 ← Reverse 2.272 3.168 ATF M-III or ←...
  • Page 31 ON-BOARD DIAGNOSTIC [SJ6A-EL] 05–02 ON-BOARD DIAGNOSTIC [SJ6A-EL] ON-BOARD DIAGNOSTIC (OBD) MALFUNCTION INDICATION FUNCTION SYSTEM OUTLINE [SJ6A-EL] ..05–02–1 [SJ6A-EL] ......05–02–3 ON-BOARD DIAGNOSTIC (OBD) FAIL-SAFE FUNCTION [SJ6A-EL] .
  • Page 32: Malfunction Detection Function [Sj6A-El]

    ON-BOARD DIAGNOSTIC [SJ6A-EL] MALFUNCTION DETECTION FUNCTION [SJ6A-EL] EHU050200000103 Malfunction Detection Function • In the malfunction detection function, the TCM detects malfunctions in the automatic transmission while driving. • When vehicle driving conditions correspond with a preset malfunction detection condition, the TCM determines that the automatic transmission has a malfunction and stores the corresponding DTC.
  • Page 33: Memory Function [Sj6A-El]

    ON-BOARD DIAGNOSTIC [SJ6A-EL] Memory DTC No. Condition warning function light P2719 Shift solenoid G range/performance (stuck) P2720 Shift solenoid G circuit malfunction (short to ground/open circuit) P2721 Shift solenoid G circuit malfunction (short to power) P2757 Torque converter clutch (TCC) stuck off P2758 Torque converter clutch (TCC) stuck on P2762...
  • Page 34 ON-BOARD DIAGNOSTIC [SJ6A-EL] On-board diagnostic Detection condition Fail-safe function • Fixes ATF temperature value at 80 °C Transmission fluid {176 °F} • TCM detects ATF temperature of 200 temperature (TFT) sensor • Inhibits slope mode control P0712 °C {392 °F} or more. circuit malfunction (short to •...
  • Page 35 ON-BOARD DIAGNOSTIC [SJ6A-EL] On-board diagnostic Detection condition Fail-safe function • TCM detects short circuit or short to Steering shift switch circuit • Inhibits manual mode control P0826 malfunction (open circuit/ ground in steering shift switch circuit short to ground) when engine is running. •...
  • Page 36 ON-BOARD DIAGNOSTIC [SJ6A-EL] On-board diagnostic Detection condition Fail-safe function • Short to ground in shift solenoid C • Emergency mode • Inhibits self learning control Shift solenoid C circuit signal system (while TCM monitors • Inhibits driver adaptive shift control P0979 malfunction (short to solenoid output voltage, the voltage...
  • Page 37: Parameter Identification (Pid) Data Monitoring Function [Sj6A-El]

    ON-BOARD DIAGNOSTIC [SJ6A-EL] On-board diagnostic Detection condition Fail-safe function • Inhibits self learning control • Inhibits driver adaptive shift control • Bus off error is detected. • Inhibits TCC control U0073 CAN BUS OFF • Inhibits 5GR, 6GR • Inhibits slip control •...
  • Page 38: Simulation Function [Sj6A-El]

    ON-BOARD DIAGNOSTIC [SJ6A-EL] Display on the tester Definition Unit/Condition TCM terminal TR switch [D range] On/Off TR switch [R position] On/Off Input/turbine speed sensor 2A, 2B UP SW Up switch On/Off VPWR Battery voltage Vehicle speed 2C, 2D End Of Sie SIMULATION FUNCTION [SJ6A-EL] EHU050200000108 •...
  • Page 39 AUTOMATIC TRANSMISSION [SJ6A-EL] 05–13 AUTOMATIC TRANSMISSION [SJ6A-EL] AUTOMATIC TRANSMISSION TORQUE CONVERTER CLUTCH (TCC) OUTLINE [SJ6A-EL] ....05–13–2 CONTROL SOLENOID OUTLINE AUTOMATIC TRANSMISSION [SJ6A-EL] ......05–13–28 CROSS-SECTIONAL VIEW SHIFT SOLENOID F, G OUTLINE [SJ6A-EL] .
  • Page 40: Automatic Transmission [Sj6A-El]

    AUTOMATIC TRANSMISSION [SJ6A-EL] AUTOMATIC TRANSMISSION OUTLINE [SJ6A-EL] EHU051300000101 • Newly developed SJ6A-EL type 6-speed AT has been adopted. • With the adoption of the line pressure solenoid, TCC control solenoid, solenoid for C3 clutch (shift solenoid F), solenoid for B2 brake (shift solenoid G), and the linear type solenoid, dynamic shift quality has been realized. End Of Sie AUTOMATIC TRANSMISSION CROSS-SECTIONAL VIEW [SJ6A-EL] EHU051300000102...
  • Page 41: Automatic Transmission Control System Wiring Diagram [Sj6A-El]

    AUTOMATIC TRANSMISSION [SJ6A-EL] AUTOMATIC TRANSMISSION CONTROL SYSTEM WIRING DIAGRAM [SJ6A-EL] EHU051300000103 TFT SENSOR N POSITION POWER SUPPLY P POSITION TR SWITCH R RANGE D RANGE 05–13 SHIFT SOLENOID A M RANGE SWITCH SHIFT SOLENOID B SELECTOR UP SWITCH SHIFT SOLENOID C LEVER COMPONENT DOWN SWITCH...
  • Page 42: Ec-At Operation Chart [Sj6A-El]

    AUTOMATIC TRANSMISSION [SJ6A-EL] End Of Sie EC-AT OPERATION CHART [SJ6A-EL] EHU051300000104 Shift pattern Transmission Solenoid ON/OFF type Linear type Mode Gear position Neutral less than 11km/n {7mph} Reverse 3.168 more than 11km/n {4mph} Neutral 3.538 2.060 1.404 1.000 AAS/ NORMAL 0.713 TCC ON 0.582...
  • Page 43: Powerflow Structure [Sj6A-El]

    AUTOMATIC TRANSMISSION [SJ6A-EL] POWERFLOW STRUCTURE [SJ6A-EL] EHU051300000105 Description of Components F3 ONE-WAY CLUTCH B2 BRAKE B4 BRAKE B1 BRAKE F1 ONE-WAY CLUTCH OUTPUT B3 BRAKE ONE-WAY CLUTCH 05–13 C3 CLUTCH C2 CLUTCH C1 CLUTCH REAR PLANETARY GEAR C4 CLUTCH MIDDLE PLANETARY GEAR FRONT PLANETARY GEAR INPUT F4 ONE-WAY CLUTCH...
  • Page 44: Powerflow Operation [Sj6A-El]

    AUTOMATIC TRANSMISSION [SJ6A-EL] POWERFLOW OPERATION [SJ6A-EL] EHU051300000106 List of operating components Clutch / Brake Operation • Engages input shaft and intermediate shaft via F4 one-way clutch. C1 clutch • Engages input shaft and middle planetary carrier. C2 clutch • Engages input shaft and front sun gear. C3 clutch •...
  • Page 45: 1Gr

    AUTOMATIC TRANSMISSION [SJ6A-EL] F3 ONE-WAY CLUTCH B2 BRAKE B4 BRAKE B1 BRAKE F1 ONE-WAY CLUTCH OUTPUT B3 BRAKE ONE-WAY CLUTCH C3 CLUTCH 05–13 C2 CLUTCH C1 CLUTCH REAR PLANETARY GEAR C4 CLUTCH MIDDLE PLANETARY GEAR FRONT PLANETARY GEAR INPUT F4 ONE-WAY CLUTCH : OPERATING : OPERATING WHEN ENGINE BRAKING E5U513ZS5006...
  • Page 46: 2Gr

    AUTOMATIC TRANSMISSION [SJ6A-EL] F3 ONE-WAY CLUTCH B2 BRAKE B4 BRAKE B1 BRAKE F1 ONE-WAY CLUTCH OUTPUT B3 BRAKE F2 ONE-WAY CLUTCH C3 CLUTCH C2 CLUTCH C1 CLUTCH REAR PLANETARY GEAR C4 CLUTCH MIDDLE PLANETARY GEAR FRONT PLANETARY GEAR INPUT F4 ONE-WAY CLUTCH : OPERATING : OPERATING WHEN ENGINE BRAKING E5U513ZS5007...
  • Page 47 AUTOMATIC TRANSMISSION [SJ6A-EL] INPUT SHAFT ROTATES CLOCKWISE. C1 CLUTCH OPERATES. INTERMEDIATE SHAFT ROTATES CLOCKWISE. MIDDLE SUN GEAR ROTATES CLOCKWISE. REAR SUN GEAR ROTATES CLOCKWISE. MIDDLE PLANETARY PINION GEAR ROTATE COUNTERCLOCKWISE. 05–13 B3 BRAKE, F2 ONE-WAY CLUTCH, AND F1 ONE-WAY CLUTCH OPERATE (LOCKS COUNTERCLOCKWISE ROTATION OF MIDDLE RING GEAR AND FRONT RING GEAR).
  • Page 48: 3Gr

    AUTOMATIC TRANSMISSION [SJ6A-EL] F3 ONE-WAY CLUTCH B2 BRAKE B4 BRAKE B1 BRAKE F1 ONE-WAY CLUTCH OUTPUT B3 BRAKE F2 ONE-WAY CLUTCH C3 CLUTCH C2 CLUTCH C1 CLUTCH REAR PLANETARY GEAR C4 CLUTCH MIDDLE PLANETARY GEAR FRONT PLANETARY GEAR INPUT F4 ONE-WAY CLUTCH : OPERATING : OPERATING WHEN ENGINE BRAKING : OPERATING BUT NOT CONTRIBUTING TO TRANSMISSION POWER...
  • Page 49 AUTOMATIC TRANSMISSION [SJ6A-EL] INPUT SHAFT ROTATES CLOCKWISE. C3 CLUTCH OPERATES. C1 CLUTCH OPERATES. FRONT SUN GEAR ROTATES CLOCKWISE. INTERMEDIATE SHAFT ROTATES CLOCKWISE. FRONT INNER PLANETARY PINION GEAR ROTATE COUNTERCLOCKWISE. FRONT OUTER PLANETARY PINION GEAR ROTATES CLOCKWISE. 05–13 F1 ONE-WAY CLUTCH OPERATES (LOCKS COUNTERCLOCKWISE ROTATION OF FRONT PLANETARY CARRIER).
  • Page 50: 4Gr

    AUTOMATIC TRANSMISSION [SJ6A-EL] F3 ONE-WAY CLUTCH B2 BRAKE B4 BRAKE B1 BRAKE F1 ONE-WAY CLUTCH OUTPUT B3 BRAKE F2 ONE-WAY CLUTCH C3 CLUTCH C2 CLUTCH C1 CLUTCH REAR PLANETARY GEAR C4 CLUTCH MIDDLE PLANETARY GEAR FRONT PLANETARY GEAR INPUT F4 ONE-WAY CLUTCH : OPERATING : OPERATING WHEN ENGINE BRAKING : OPERATING BUT NOT CONTRIBUTING TO TRANSMISSION POWER...
  • Page 51: 5Gr

    AUTOMATIC TRANSMISSION [SJ6A-EL] F3 ONE-WAY CLUTCH B2 BRAKE B4 BRAKE B1 BRAKE F1 ONE-WAY CLUTCH OUTPUT B3 BRAKE F2 ONE-WAY CLUTCH C3 CLUTCH 05–13 C2 CLUTCH C1 CLUTCH REAR PLANETARY GEAR C4 CLUTCH MIDDLE PLANETARY GEAR FRONT PLANETARY GEAR INPUT F4 ONE-WAY CLUTCH : OPERATING : OPERATING BUT NOT CONTRIBUTING TO TRANSMISSION POWER...
  • Page 52 AUTOMATIC TRANSMISSION [SJ6A-EL] INPUT SHAFT ROTATES CLOCKWISE. C3 CLUTCH OPERATES. C2 CLUTCH OPERATES. FRONT SUN GEAR ROTATES CLOCKWISE. FRONT INNER PLANETARY PINION GEAR ROTATE COUNTERCLOCKWISE. FRONT OUTER PLANETARY PINION GEAR ROTATES CLOCKWISE. B1 BRAKE OPERATES (LOCKS ROTATION OF FRONT PLANETARY CARRIER). FRONT RING GEAR ROTATES CLOCKWISE.
  • Page 53: 6Gr

    AUTOMATIC TRANSMISSION [SJ6A-EL] F3 ONE-WAY CLUTCH B2 BRAKE B4 BRAKE B1 BRAKE F1 ONE-WAY CLUTCH OUTPUT B3 BRAKE F2 ONE-WAY CLUTCH C3 CLUTCH 05–13 C2 CLUTCH C1 CLUTCH REAR PLANETARY GEAR C4 CLUTCH MIDDLE PLANETARY GEAR FRONT PLANETARY GEAR INPUT F4 ONE-WAY CLUTCH : OPERATING : OPERATING BUT NOT CONTRIBUTING TO TRANSMISSION POWER...
  • Page 54 AUTOMATIC TRANSMISSION [SJ6A-EL] INPUT SHAFT ROTATES CLOCKWISE. C2 CLUTCH OPERATES. MIDDLE PLANETARY CARRIER ROTATES CLOCKWISE. MIDDLE PLANETARY PINION GEARS ROTATE COUNTERCLOCKWISE. B2 BRAKE OPERATES (LOCKS ROTATION OF MIDDLE RING GEAR). MIDDLE SUN GEAR ROTATES CLOCKWISE. REAR SUN GEAR ROTATES CLOCKWISE. REAR RING GEAR ROTATES CLOCKWISE.
  • Page 55: R Position

    AUTOMATIC TRANSMISSION [SJ6A-EL] R position F3 ONE-WAY CLUTCH B2 BRAKE B4 BRAKE B1 BRAKE F1 ONE-WAY CLUTCH OUTPUT B3 BRAKE F2 ONE-WAY CLUTCH C3 CLUTCH 05–13 C2 CLUTCH C1 CLUTCH REAR PLANETARY GEAR C4 CLUTCH MIDDLE PLANETARY GEAR FRONT PLANETARY GEAR INPUT F4 ONE-WAY CLUTCH : OPERATING...
  • Page 56 AUTOMATIC TRANSMISSION [SJ6A-EL] INPUT SHAFT ROTATES CLOCKWISE. C3 CLUTCH OPERATES. FRONT SUN GEAR ROTATES CLOCKWISE. FRONT INNER PLANETARY PINION GEAR ROTATE COUNTERCLOCKWISE. FRONT OUTER PLANETARY PINION GEAR ROTATES CLOCKWISE. B1 BRAKE AND F1 ONE-WAY CLUTCH OPERATES (LOCKS FRONT PLANETARY CARRIER). FRONT RING GEAR ROTATES CLOCKWISE.
  • Page 57: Control Valve Body Component Outline

    AUTOMATIC TRANSMISSION [SJ6A-EL] CONTROL VALVE BODY COMPONENT OUTLINE [SJ6A-EL] EHU051321100101 • The control valve body supplys oil by switching the oil circuit for the hydraulic pressure generated by the oil pump. Based on the control signal from the TCM, the solenoid valves are activated to control the hydraulic pressure to the clutch and brakes, performing gear shift and TCC.
  • Page 58: Electronic Control System

    AUTOMATIC TRANSMISSION [SJ6A-EL] ELECTRONIC CONTROL SYSTEM CONSTRUCTION [SJ6A-EL] EHU051318901101 STEERING SHIFT SWITCH SELECTOR INDICATOR LIGHT (DOWN SWITCH) AT WARNING LIGHT BRAKE SWITCH GEAR POSITION STEERING SHIFT SWITCH INDICATOR LIGHT APP SENSOR (UP SWITCH) ECT SENSOR MAF SENSOR ECCENTRIC SHAFT POSITION SENSOR SELECTOR LEVER COMPONENT M RANGE SWITCH ·...
  • Page 59: Electronic Control System

    AUTOMATIC TRANSMISSION [SJ6A-EL] ELECTRONIC CONTROL SYSTEM BLOCK DIAGRAM [SJ6A-EL] EHU051318901102 INPUT SIGNALS INPUT SIGNALS TR SWITCH TFT CHECK CONNECTOR TFT SENSOR OTHER MODULE TURBINE BRAKE SWITCH SENSOR INPUT SIGNALS M RANGE SWITCH MAF SENSOR UP SWITCH APP SENSOR DOWN SWITCH ECCENTRIC SHAFT POSITION SENSOR 05–13...
  • Page 60: Component Descriptions

    AUTOMATIC TRANSMISSION [SJ6A-EL] COMPONENT DESCRIPTIONS (ELECTRONIC CONTROL) [SJ6A-EL] EHU051318901104 Part name Function • Detects parking gear (output) revolution speed. • Detects direct and reverse disc clutch case (input) revolution Turbine sensor speed. • Detects selector lever ranges/positions. TR switch • Selects driving modes (M range) and changes driving M range switch patterns.
  • Page 61: Automatic Transmission [Sj6A-El]

    AUTOMATIC TRANSMISSION [SJ6A-EL] INPUT/OUTPUT SIGNAL AND RELATED CONTROLS [SJ6A-EL] EHU051318901105 Control item Manual 5-6 shift Torque Line Shift On-board Component Shift mode inhibit reduction pressure learning diagnostic control shift control control control control control function control Input Turbine sensor TR switch M range switch Up switch Down switch...
  • Page 62 AUTOMATIC TRANSMISSION [SJ6A-EL] TRANSMISSION RANGE (TR) SWITCH FUNCTION [SJ6A-EL] EHU051319200101 • The TR switch sends information on which range is selected in the automatic transmission using a combination of the position circuit terminals, and its functions are as follows: 1. Enables engine starting only in P or N positions 2.
  • Page 63 AUTOMATIC TRANSMISSION [SJ6A-EL] TURBINE SENSOR, VEHICLE SPEED SENSOR (VSS) CONSTRUCTION/OPERATION [SJ6A-EL] EHU051319200102 • The turbine sensor detects the rotation speed of the direct and reverse disc clutch case, and sends it to the TCM as a signal. • The VSS detects the rotation speed of the parking gear and sends it to the TCM as a signal. •...
  • Page 64 AUTOMATIC TRANSMISSION [SJ6A-EL] TRANSMISSION FLUID TEMPERATURE (TFT) SENSOR OUTLINE [SJ6A-EL] EHU051319200103 • The TFT sensor and the coupler component are equipped to the control valve body component as a single unit. • A hydraulic pressure sensor for hydraulic control during shifting has been equipped inside the control valve body component.
  • Page 65 AUTOMATIC TRANSMISSION [SJ6A-EL] SHIFT SOLENOID E OUTLINE [SJ6A-EL] EHU051321101102 • Shift solenoid E is directly equipped to the control valve body component. • Shift solenoid E turns on and off according to the control signals from the TCM, and switches the C4 clutch and the B1 brake.
  • Page 66: Torque Converter Clutch (Tcc) Control Solenoid Outline [Sj6A-El]

    AUTOMATIC TRANSMISSION [SJ6A-EL] TORQUE CONVERTER CLUTCH (TCC) CONTROL SOLENOID OUTLINE [SJ6A-EL] EHU051321101104 • Adjusts the pressure of the TCC in the torque converter based on the control signals from the TCM. TCC CONTROL SOLENOID INCREASES GENERATED HYDRAULIC PRESSURE CURRENT INCREASES E5U513ZS5030 End Of Sie 05–13–28...
  • Page 67: Shift Solenoid F, G Outline [Sj6A-El]

    AUTOMATIC TRANSMISSION [SJ6A-EL] SHIFT SOLENOID F, G OUTLINE [SJ6A-EL] EHU051321101105 • By performing linear adjustment of the C3 clutch pressure and the B2 brake pressure based on the control signals from the TCM, the pressure which is applied to the C3 clutch and the B2 brake is directly controlled during shift changes from 5th to 6th gears.
  • Page 68: Coupler Component Outline [Sj6A-El]

    AUTOMATIC TRANSMISSION [SJ6A-EL] COUPLER COMPONENT OUTLINE [SJ6A-EL] EHU051321101106 • The coupler component are installed on the transmission case as the grouped connectors of the TFT sensor and solenoids. TFT SENSOR SHIFT LINE PRESSURE SOLENOID F CONTROL SOLENOID SHIFT SOLENOID G SHIFT SHIFT SOLENOID E...
  • Page 69: Down Slope Mode

    AUTOMATIC TRANSMISSION [SJ6A-EL] Shift control in active adaptive shift (AAS) mode • Shift control is performed according to the shift pattern in AAS mode. • When the driver releases the accelerator pedal fully and rapidly, the gear position is maintained at the position before accelerator pedal was released.
  • Page 70: Manual Mode Shift Control Structure [Sj6A-El]

    AUTOMATIC TRANSMISSION [SJ6A-EL] MANUAL MODE SHIFT CONTROL STRUCTURE [SJ6A-EL] EHU051318901107 Features • The manual mode shift control is activated by moving the selector lever from the D to M range position (selector lever is shifted over toward driver side). • Manual mode shift control with a manual shifting system allowing selection of gear positions by manual operation of the selector lever forward (–) and back (+) has been adopted.
  • Page 71: Manual Mode Shift Control Operation [Sj6A-El]

    AUTOMATIC TRANSMISSION [SJ6A-EL] MANUAL MODE SHIFT CONTROL OPERATION [SJ6A-EL] EHU051318901108 Manual Mode Shift • When the selector lever is shifted over from the D to M range position, the M range switch in the selector lever component turns on, sending a manual mode command signal to the TCM which activates the manual mode shift control.
  • Page 72: Shift Diagram

    AUTOMATIC TRANSMISSION [SJ6A-EL] Condition Shift control Note • To improve acceleration performance, 6GR Wide open throttle at 175— 210 km/h {109—130 mph} in to 5GR kickdown occurs — • To improve acceleration performance, 5GR Wide open throttle at 40—174 km/h {25—108 mph} in 5GR to 4GR kickdown occurs Shift Diagram TCC OPERATION AVAILABLE...
  • Page 73: At Warning Light Construction/Operation [Sj6A-El]

    AUTOMATIC TRANSMISSION [SJ6A-EL] AT WARNING LIGHT CONSTRUCTION/OPERATION [SJ6A-EL] EHU051321101108 • The AT warning light is built into the instrument cluster. • The AT warning light illuminates when the instrument cluster receives a warning signal from the TCM via CAN communication. •...
  • Page 74: Selector Indicator Light Construction/Operation [Sj6A-El]

    AUTOMATIC TRANSMISSION [SJ6A-EL] SELECTOR INDICATOR LIGHT CONSTRUCTION/OPERATION [SJ6A-EL] EHU051321101110 Construction • The selector indicator light is built into the instrument cluster. • When in the P, R, N or D range, the TCM detects the selector lever position based on an analog signal from the TR switch.
  • Page 75: Torque Converter Clutch (Tcc) Control Outline [Sj6A-El]

    AUTOMATIC TRANSMISSION [SJ6A-EL] TORQUE CONVERTER CLUTCH (TCC) CONTROL OUTLINE [SJ6A-EL] EHU051318901109 • Based on the TCC diagram, the TCC control solenoid is turned on and off according to the vehicle speed and throttle opening angle, and the TCC point control is performed. •...
  • Page 76: Self-Diagnosis Function Outline [Sj6A-El]

    AUTOMATIC TRANSMISSION [SJ6A-EL] SELF-DIAGNOSIS FUNCTION OUTLINE [SJ6A-EL] EHU051318901112 • The TCM monitors the communication status of each sensor, electronic component and PCM including the PCM. If any malfunction should occur, the TCM functions to warn the driver and stores the malfunction as a diagnosis code.
  • Page 77 AUTOMATIC TRANSMISSION SHIFT MECHANISM 05–14 AUTOMATIC TRANSMISSION SHIFT MECHANISM AUTOMATIC TRANSMISSION SHIFT STEERING SHIFT SWITCH MECHANISM OUTLINE ... . 05–14–1 CONSTRUCTION/OPERATION ..05–14–1 Construction ..... 05–14–1 Operation .
  • Page 79 RESTRAINTS SECTION Toc of SCT OUTLINE ....08-00 AIR BAG SYSTEM ..08-10 ON-BOARD DIAGNOSTIC ..08-02 Toc of SCT 08–00 OUTLINE...
  • Page 81 ON-BOARD DIAGNOSTIC 08–02 ON-BOARD DIAGNOSTIC ON-BOARD DIAGNOSTIC ON-BOARD DIAGNOSTIC FUNCTION OUTLINE ....08–02–1 FUNCTION FUNCTION ... . . 08–02–1 Self-diagnostic Function .
  • Page 82 ON-BOARD DIAGNOSTIC PID/Data Monitoring Function • By using the PID/data monitoring function, the monitored item of the input/output signal, as set on the SAS control module, can be freely selected and read out in real-time. • The WDS or equivalent is used to read out PID/data monitor information. PID name (definition) Unit/Condition Operation Condition (Reference)
  • Page 83 ON-BOARD DIAGNOSTIC PID name (definition) Unit/Condition Operation Condition (Reference) Terminal • Related wiring harness short to power supply: SHRT_B+ SHRT_B+/ • Related wiring harness short to ground: SHRT_GND DS2_STAT SHRT_GND/ • Related wiring harness circuit open: OPEN (Driver-side air bag module OPEN/ 1G, 1J •...
  • Page 84 ON-BOARD DIAGNOSTIC PID name (definition) Unit/Condition Operation Condition (Reference) Terminal OD_CRST_P1 • Sensor normal: OK (On demand passenger-side 2B, 2C • Sensor communication error: FAULT side air bag sensor FAULT communication state) OD_CRST_P2 • Sensor normal: OK (On demand passenger-side 2B, 2C •...
  • Page 85 ON-BOARD DIAGNOSTIC PID name (definition) Unit/Condition Operation Condition (Reference) Terminal • Related wiring harness short to power supply: SHRT_B+ SHRT_B+/ • Related wiring harness short to ground: SHRT_GND PS_AB_ST SHRT_GND/ • Related wiring harness circuit open: OPEN (Passenger-side side air bag OPEN/ 2I, 2L •...
  • Page 87: Air Bag System

    AIR BAG SYSTEM 08–10 AIR BAG SYSTEM AIR BAG SYSTEM OUTLINE ..08–10–1 PASSENGER SENSING SYSTEM AIR BAG SYSTEM OUTLINE ......08–10–2 STRUCTURAL VIEW .
  • Page 88 AIR BAG SYSTEM AIR BAG SYSTEM WIRING DIAGRAM EHU081000000103 CLOCK SPRING INSTRUMENT CLUSTER INFLATOR NO.1 DRIVER-SIDE SEAT BELT AIR BAG AIR BAG WARNING SYSTEM MODULE LIGHT WARNING INFLATOR LIGHT NO.2 INFLATOR NO.1 PASSENGER-SIDE DLC-2 AIR BAG MODULE INFLATOR TWISTED PAIR NO.2 SEAT TRACK POSITION...
  • Page 89 AIR BAG SYSTEM PASSENGER SENSING SYSTEM CONSTRUCTION EHU081057031102 • Consists of the seat weight sensors installed on the underside of the front passenger slide adjuster, the seat weight sensor control module installed to the underside of the seat weight sensor on the right, the PAD indicator, and the SAS control module installed on the console.
  • Page 90 AIR BAG SYSTEM ELECTRIC SIGNAL ADULT DETERMINED SEAT WEIGHT SENSOR SEAT (RH) WEIGHT PASSENGER-SIDE SENSOR AIR BAG MODULE CONTROL SEAT MODULE WEIGHT CONTROL SENSOR MODULE PASSENGER-SIDE SIDE (LH) TWISTED AIR BAG MODULE PAIR PASSENGER-SIDE PRE-TENSIONER SEAT BELT ELECTRIC SIGNAL CHILD (INCLUDING A INDICATOR CHILD-RESTRAINT SEAT) SEAT...
  • Page 91: Security And Locks

    BODY & ACCESSORIES SECTION Toc of SCT OUTLINE ....09-00 SECURITY AND LOCKS SECURITY AND LOCKS [KEYLESS ENTRY [ADVANCED SYSTEM] ....09-14B KEYLESS SYSTEM].
  • Page 93: Security And Locks Outline

    SECURITY AND LOCKS [ADVANCED KEYLESS SYSTEM] 09–14A SECURITY AND LOCKS [ADVANCED KEYLESS SYSTEM] SECURITY AND LOCKS OUTLINE ..09–14A–1 WARNING/GUIDANCE SECURITY AND LOCKS FUNCTION OPERATION ... . 09–14A–8 STRUCTURAL VIEW .
  • Page 94: Security And Locks Structural View

    SECURITY AND LOCKS [ADVANCED KEYLESS SYSTEM] SECURITY AND LOCKS STRUCTURAL VIEW EHU091400001102 KEYLESS INDICATOR LIGHT (GREEN) KEYLESS WARNING LIGHT START KNOB (IGNITION SWITCH) (RED) STEERING LOCK UNIT BRAKE COIL ANTENNA KEYLESS TRUNK LID OPENER RECEIVER CANCEL SWITCH SECURITY LIGHT KEYLESS ANTENNA (INTERIOR, FRONT) KEYLESS ANTENNA (INTERIOR, REAR)
  • Page 95: Security And Locks System Wiring Diagram

    SECURITY AND LOCKS [ADVANCED KEYLESS SYSTEM] SECURITY AND LOCKS SYSTEM WIRING DIAGRAM EHU091400001103 KEYLESS ANTENNA (EXTERIOR, RF) KEYLESS ANTENNA (EXTERIOR, LF) KEYLESS ANTENNA (EXTERIOR, REAR) KEYLESS ANTENNA (INTERIOR, MIDDLE) WITH IMMOBILIZER KEYLESS ANTENNA (INTERIOR, REAR) SYSTEM KEYLESS RECEIVER KEYLESS ANTENNA (INTERIOR, TRUNK) COIL ANTENNA KEYLESS ANTENNA (INTERIOR, FRONT)
  • Page 96: Power Door Lock System Operation

    SECURITY AND LOCKS [ADVANCED KEYLESS SYSTEM] POWER DOOR LOCK SYSTEM OPERATION EHU091466000102 • When the driver’s door is locked/unlocked with the driver’s door lock knob or key cylinder, the door lock-link switch in the door lock actuator is locked/unlocked via the rod. •...
  • Page 97 SECURITY AND LOCKS [ADVANCED KEYLESS SYSTEM] 3. The keyless control module operates the hazard warning lights flash to flash according to lock/unlock signal from the transmitter (card key). — When the LOCK button is pressed, the hazard warning lights flash once. —...
  • Page 98 SECURITY AND LOCKS [ADVANCED KEYLESS SYSTEM] Trunk lid opening Note • If any of the following conditions are not met, the trunk lid cannot be opened by operating the request switch. — The auxiliary key is not inserted in the ignition key cylinder. —...
  • Page 99: Advanced Keyless Start Function Operation

    SECURITY AND LOCKS [ADVANCED KEYLESS SYSTEM] Out-of-area (reception area) autolock function • When all doors are closed and the driver is out of the reception area carrying the card key, the doors are automatically locked. (Initial setting is OFF.) 1. When all the following conditions are met and all doors are closed after any door or the trunk lid is open, the keyless beeper sound is heard and the function starts operation.
  • Page 100 SECURITY AND LOCKS [ADVANCED KEYLESS SYSTEM] WARNING/GUIDANCE FUNCTION OPERATION EHU091469000104 • If the system is operated improperly, it warns the driver using the indicator light in the instrument cluster, buzzer sound, and keyless beeper in the trunk compartment. • The operation condition of the advanced keyless system is indicated by the indicator light and beeper sound to guide user’s operation.
  • Page 101: On-Board Diagnosys System

    2006MY Mazda RX-8 Service Highlights (3409–1U–05J) SECURITY AND LOCKS [ADVANCED KEYLESS SYSTEM] ON-BOARD DIAGNOSYS SYSTEM OUTLINE (KEYLESS ENTRY SYSTEM) EHU091469000106 Special Features • The keyless entry system has an on-board diagnostic function to facilitate system diagnosis. • The on-board diagnostic function consists of the following functions: a malfunction detection function, which detects overall malfunctions in the keyless entry system-related parts;...
  • Page 102: Pid/Data Monitor Function

    2006MY Mazda RX-8 Service Highlights (3409–1U–05J) SECURITY AND LOCKS [ADVANCED KEYLESS SYSTEM] PID/data monitor function • The PID/data monitor function is used for optionally selecting input/output signal monitor items preset in the keyless control module and reading them out in real-time.
  • Page 103: Card Key (Transmitter) Construction/Operation

    SECURITY AND LOCKS [ADVANCED KEYLESS SYSTEM] CARD KEY (TRANSMITTER) CONSTRUCTION/OPERATION EHU091469000108 • A card-type transmitter that is thin and convenient to carry has been adopted. • A maximum of six transmitters can be programmed for one vehicle. • A built-in operation indicator light illuminates according to LOCK/UNLOCK button operation and request signal from the vehicle.
  • Page 104: Request Switch

    SECURITY AND LOCKS [ADVANCED KEYLESS SYSTEM] REQUEST SWITCH CONSTRUCTION EHU091469000110 • Installed on both doors and trunk lid. INTERNAL CIRCUIT DIAGRAM REQUEST SWITCH REQUEST SWITCH EHU914AS8009 End Of Sie 09–14A–12...
  • Page 105 SECURITY AND LOCKS [KEYLESS ENTRY SYSTEM] 09–14B SECURITY AND LOCKS [KEYLESS ENTRY SYSTEM] SECURITY AND LOCKS OUTLINE ..09–14B–1 KEYLESS ENTRY SYSTEM Features ......09–14B–1 STRUCTURAL VIEW .
  • Page 106 SECURITY AND LOCKS [KEYLESS ENTRY SYSTEM] KEYLESS ENTRY SYSTEM STRUCTURAL VIEW EHU091466000108 TRUNK LID OPENER CANCEL SWITCH DOOR LOCK SWITCH TRANSMITTER KEYLESS CONTROL MODULE TRUNK LID OPENER RELAY REAR DOOR KEY REMINDER UPPER LATCH SWITCH SWITCH DOOR KEY CYLINDER SWITCH FRONT DOOR LOCK ACTUATOR (BUILT-IN DOOR...
  • Page 107 SECURITY AND LOCKS [KEYLESS ENTRY SYSTEM] KEYLESS ENTRY SYSTEM WIRING DIAGRAM EHU091466000109 KEYLESS CONTROL MODULE INSTRUMENT CLUSTER DOOR HORN SWITCH (LH) RELAY HORN DOOR SWITCH (RH) REAR DOOR REAR DOOR UPPER LATCH LOWER LATCH SWITCH SWITCH FLASHER CONTROL MODULE KEY REMINDER HAZARD WARNING SWITCH SWITCH...
  • Page 109 ENTERTAINMENT 09–20 ENTERTAINMENT CAR-NAVIGATION SYSTEM OUTLINE . 09–20–1 CAR-NAVIGATION UNIT CAR-NAVIGATION SYSTEM CONSTRUCTION ....09–20–4 STRUCTURAL VIEW ....09–20–2 Structure .
  • Page 110 ENTERTAINMENT CAR-NAVIGATION SYSTEM STRUCTURAL VIEW EHU092066000102 CAR-NAVIGATION UNIT LCD UNIT AUDIO UNIT GPS ANTENNA FRONT TWEETER MAIN AMPLIFIER (BOSE) FRONT DOOR SPEAKER FRONT DOOR SPEAKER AMPLIFIER (BOSE) CAR-NAVIGATION CONTROL SWITCH BACK-UP LIGHT SWITCH (MT) TR SWITCH (AT) DSC HU/CM (WITH DSC) OR ABS HU/CM (WITH ABS) CHU0920S100 End Of Sie...
  • Page 111 ENTERTAINMENT CAR-NAVIGATION SYSTEM BLOCK DIAGRAM EHU092066000103 CAR-NAVIGATION UNIT VEHICLE ABS HU/CM (WITH ABS) OR SPEED SIGNAL DSC HU/CM (WITH DSC) R-RANGE TR SWITCH (AT) OR SIGNAL BACK-UP LIGHT SWITCH (MT) GPS ANTENNA PARKING BRAKE SWITCH RECEIVER PARKING BRAKE GYRO SIGNAL SENSOR LCD UNIT DVD DRIVER...
  • Page 112 ENTERTAINMENT CAR-NAVIGATION UNIT CONSTRUCTION EHU092066902102 Structure • The car-navigation unit is located in the console. • An Eject button, to eject the DVD-ROM from the loading slot, is included in the unit. • A gyro sensor which detects vehicle cornering angle is built into the unit. DVD-ROM LOADING SLOT DVD-ROM EJECT BUTTON...
  • Page 113 ENTERTAINMENT Signals Terminal 24-pin connector – – – – – – – – – – – – – Monitor serial input Shield GND Monitor serial output Shield GND Video (composit sync) – Video (B) Video GND Video (G) 09–20 – Video (R) Signals Terminal...
  • Page 114 ENTERTAINMENT NAVIGATION FUNCTION EHU092066000106 Outline • A vehicle's position is measured by a hybrid method of autonomous navigation (using yaw-rate signals from the gyro sensor and vehicle speed signals from BCM) and GPS navigation (using signals from GPS satellites). Accurate detection of the vehicle's position is possible based on the adoption of a map-matching function which specifies the vehicle's position as compared with the map data read from the DVD-ROM and the vehicle’s position measured from autonomous navigation and GPS navigation.
  • Page 115: Road Name

    ENTERTAINMENT Scroll map mode • The scroll map is displayed when operating the joystick on the current position map. • This map can be scrolled with the crosshair cursor. ROAD NAME CROSSHAIR CURSOR DISTANCE TO THE CURRENT POSITION DESTINATION/VIA POINT DISPLAY MODE POI BUTTON BUTTON...
  • Page 116 ENTERTAINMENT Intersection zoom map • An enlarged map is displayed when approaching an intersection. (While in route guidance.) Activated by selecting Guidance Screen (On) in setup mode. DISTANCE TO THE NEXT TURN NEXT ROAD NAME DISTANCE TO THE NEXT TURN EPU920ZS2019 Pop Up Menu •...
  • Page 117 ENTERTAINMENT Destination Setting Function Outline • The following instructions explain how destinations can be chosen and set. Note • A destination can be set to where the crosshair cursor indicates by selecting the Destination option of the scroll map mode pop-menu. Address Destination top menu Name...
  • Page 119 INSTRUMENTATION/DRIVER INFO. 09–22 INSTRUMENTATION/DRIVER INFO. INSTRUMENT CLUSTER OUTLINE..09–22–1 INSTRUMENT CLUSTER INSTRUMENT CLUSTER STRUCTURAL VIEW ....09–22–4 SPECIFICATIONS ....09–22–2 Warning And Indicator Light .
  • Page 120 INSTRUMENTATION/DRIVER INFO. INSTRUMENT CLUSTER SPECIFICATIONS EHU092255430102 Item Specification Meter type Indication range (mph {km/h}) 0—186 {0—299} Input signal communication system CAN system Speedometer ABS HU/CM (with ABS) Input signal source DSC HU/CM (with DSC) Rated voltage DC 12 Meter type Stepping motor type (rpm) 0—9,000 (13B-MSP (Standard Power))
  • Page 121 INSTRUMENTATION/DRIVER INFO. Item Specification Sound frequency (Hz) 800—1,500 75.0 (over-revolution warning alarm) Output sound pressure level (dB) 67.5 (except over-revolution warning alarm) Sound frequency (Hz) 1,000 CONTINUOUS Lights-on reminder warning alarm Sound cycle Sound frequency (Hz) CONTINUOUS Key reminder t 1 : approx. 0.22 S warning alarm Sound cycle t 2 : approx.
  • Page 122 INSTRUMENTATION/DRIVER INFO. INSTRUMENT CLUSTER STRUCTURAL VIEW EHU092255430103 Warning And Indicator Light BRAKE EHU922ZS8001 ×: Applicable Warning and indicator Input signal source CAN system Note light EPS warning light EPS control module — Washer fluid-level warning With washer fluid-level warning Washer fluid-level sensor —...

Table of Contents