Advertisement
Step 4
Reconnection of the automatic opener
To reconnect the automatic operator to the garage door, manually operate the
garage door by hand until the automatic operator carriage lines-up with the steel
ramp rails.
Once in-line, re-insert the manual release rod into the automatic operator point by
turning the release rod clockwise.
Continue to turn the release rod clockwise until the steel bearing on the release
rod is located between the steel ramp plates.
We recommend that your garage door is serviced annually to ensure that your attached opener can operate optimally and to allow us to
inspect the system for any potential problems that may be occurring.
SERVICING INFORMATION
PDS Garage Doors
38 Yale Drive
Epping (Vic) 3076
Phone: (03) 9408 3418
Email: service@pdsgaragedoors.com.au
Web: www.pdsgaragedoors.com.au
Advertisement
