Advertisement
POWER FAILURE - MANUAL RELEASE PROCEDURE
Locate the manual release rod.
Step 1
Locate the yellow ring handle manual release turn rod which is positioned between
the two steel ramp rails.
Ramp rails are located on the same side of the motor and are attached to the back
of the door panel.
Remove the manual release rod.
Step 2
Using the yellow ring provided, turn the manual release rod anti-clockwise, this will
unwind the manual release rod from the automatic operator drive carriage.
Continue to turn the manual release rod until it come free from the automatic
operator drive carriage.
Operate garage door by hand.
Step 3
Once the manual release rod is removed completely, you will be able to lift or
close the garage door manually by hand. When operating the garage door
manually at anytime or in any location through the fully open to fully closed
locations, check the surrounding areas each side, behind and in front of the
garage door to ensure no obstructions may foul the door operation.
All counterweight garage doors are
!
inherently heavy, it is advised that when
using any garage door by hand the
operator should remain diligent when
operating the door to ensure it does not
open or close unexpectedly.
IMPORTANT
IMPORTANT
5
Advertisement
