•
After installing the equipment in the desired position, adjust the
horizontal foot of the dryer if the ground is uneven (do not insert
wood chips or any other items under the foot).
•
Avoid direct sunlight and ensure that the room has good ventilation.
•
Models with ventilation openings at the bottom should not be
placed on floor materials such as carpets that can block ventilation
openings.
•
Cotton chips are not allowed to pile up around the drum dryer.
•
Please install the product in an ambient temperature of 5 ~ 35 °C.
•
In an environment where the temperature is too high or too low, the
product performance may be reduced.
•
Recommended distance between the product and the wall:
Top: 25 mm
o
Both sides: 25 mm
o
Back: 50 mm
o
Adjusting the Leg
Use a leveling tool to
confirm that the
dryer is installed
horizontally. If
not, adjust the
horizontal foot as
required.
13
Need help?
Do you have a question about the ED 0810 UCWH and is the answer not in the manual?