Thank you for your trust in choosing MODENA products for your household needs. With your satisfaction as our priority, we constantly aim to deliver stylishly designed products equipped with state-of-the-art technology to assist you in your daily activities. This is your guidebook containing everything you need to know about our product.
TABLE OF CONTENTS PAGE - Introduction - Part 1: Name of Parts - Part 2: Installation - Part 3: How to Use - Part 4: International Textile Care Label (ITCL) - Part 5: Maintenance - Part 6: Precaution - Part 7: Problem & Solving - Part 8: Specification Appendix...
Part 1: Name of parts ED 770 1. Top Board 2. Control Panel 3. Door 4. Front Panel 5. Side Panel 6. Filter 7. Flex Tube 8. Power Plug 9. Switch 10. Drum Part 2: Installation Make sure the air hole on the front and the back part of the tumble dryer is not closed. The back part of the tumble dryer will be very hot when it is turned on.
If the power plug needs to be changed, follow the explanation below. The Color of the cable at the power cable shows code as the following: Green and Yellow – Earth / Grounding Blue – Neutral Brown – Live Green and Yellow cable must be connected to the terminal signed with the letter or symbol (earth) or in green and yellow color.
Page 6
ED 770 ON/OFF Button Button # 1 To turn on and off the tumble dryer. Start/Pause Button # 2 It functions to start/stop the drying program. Signal Button # 3 If the signal button is activated, there will be a sound/bell signal in every end of the program.
Page 7
The choosing knob is divided into some parts as the following: Cottons Synthetics Time Special Airing Wool Standard Cotton Option "Less" is used for drying clothes made from cotton. If the cotton clothes are mixed with other type of fabrics, rotate it to "Extra" or "Standard". Standard Synthetics This option is used to dry clothes made from synthetic materials, can be dried with "Standard"...
Page 8
hour. The "Delay" function can be chosen before or after selecting the optional program (Buzzer, Quick, and Delicate), Anti-Crease Button This button is for turning on the anti-crease program for a maximum of 2 hours on the clothes. If it is not pressed, the "Anti-Crease" program will only work for a maximum of 30 minutes.
Do not dry clean Part 5: Maintenance MODENA tumble dryer is specially designed for long term usage, thus it does not need complex maintenance. However, some maintenance procedures below are recommended for your tumble dryer maintenance. Before doing the maintenance, make sure that the unit is not connected to the electrical source.
Cleaning the filter: Clean the lint filter before usage. Remove the filter by pulling it straight up. Cleaning Filter. Use a soft cloth and wipe it with your hand. Install filter. If the filter has been cleaned by damp cloth or in the water, please install back after being dried.
Page 11
Do not plug in or out the power Do not use an extension The machine must be plug to the socket with wet lead. connected to a power supply hands. with an efficient grounding, according to the law. Do not expose the machine After usage, it is advisable Do not pull the cable to directly under the sun.
1. The error code table in appendix to find the problems. If the problem cannot be identified or resolved, immediately contact the MODENA call center. Before contacting MODENA call center, check the record unit model, serial number and date of purchase of units: The call center will require this information.
Part 8: Specifications Model ED 770 Type of dryer Tumble Dryer Dryer capacity (kg) Color White Drying time (min) Ideal load for Cotton (kg) Ideal load for Synthesis (kg). Drum Material Galvanic Steel Anti-wrinkle program On / Off button Electric voltage (Volt) 220-240 Frequency (Hz) Power (watts)
Page 14
Appendix: Error Code The following error code that probably appear on the display of dryer machine: Error MALFUNCTION POSSIBLE CAUSE SOLUTION Code temperature Temperature sensor is opened or short- Stop the program and call the sensor error circuit happened call center...
Need help?
Do you have a question about the Ettore Series and is the answer not in the manual?
Questions and answers