Advertisement
Read the safety instructions first.
BaByliss Diamond Ceramic is a high-density ceramic coating for professional use. The perfect glide and heat-transfer qualities guarantee softness, shine and protection of the hair. ST326E has the following features:
Straightening: Plug in the appliance, switch on and allow to heat up. The red indicator light will stop flashing when the unit has heated up to the selected temperature. Thoroughly brush hair and section. Start with the underneath sections of hair. Take a section of about 5 cm width and place it between the 2 hot plates, being careful to avoid touching the hot surface of the appliance with your hand. Hold the hair firmly with the straightener and slide slowly along from the roots to the tips. Repeat again if necessary. Let the hair cool down before you comb it. After use, switch off and unplug the appliance. Allow to cool before storing away.
Styling: To create perfectly shaped bobs use as above but turn the appliance under at the end of your hair and hold in place for a couple of seconds and then release. For flick-ups follow the same procedure but angle the appliance out at the end of your hair instead of under.
Notes:
Temperature | Hair type |
140 – 160°C | Fine, bleached and/ or damaged hair |
160 – 180°C | Normal, coloured and/or wavy hair |
180 – 235°C | Thick and/or very curly hair |
BABYLISS
99 avenue Aristide Briand 92120 Montrouge
France
www.babyliss.com
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download BaByliss SLIM 28mm PROTECT ST326E - Hair Brush Manual
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the SLIM ST326E that isn't answered in the manual? Leave your question here.