Govee H6058 - StarPal Pro Table Lamp Manual

Table of Contents

Contents

1 Safety Instructions
2 Introduction
3 What You Get
4 At a Glance
5 Installing Your Device
6 Pairing Your Device with the Govee Home App
7 Specifications
8 Troubleshooting
9 Customer Service
10 Documents / Resources
- 10.1 References
- 10.2 Download manual

Safety Instructions

Read and follow all the safety instructions:

The lamp is not waterproof. Avoid exposing it to splashing or dripping water.
The operating temperature should be within -10° to 45°C (14° to 113°F).
The lamp's internal light source cannot be replaced. If it breaks, you must replace the entire lamp.
Do not install the lamp with a dimming driver.
Do not place the lamp near the heat source or expose it to the sunlight for a long time.
Avoid installing the lamp near potentially dangerous sources (e.g., candles, liquid-filled objects).
Avoid charging the product in environments lower than 32℉(0℃)or higher than 113℉(45℃).Avoid using the product in environments below -4℉(-20℃)or above 140℉(60℃).

Introduction

This lamp emits warm and smooth white lighting, and you can also apply over 16M RGB lighting effects via connecting to the Govee Home app.

What You Get

Table Lamp	1
Adapter	1
User Manual	1
Service Card	1

At a Glance

Control Button	Power On: Press and hold for 3s
	Power Off: Press and hold for 10s (the light will flash with blue twice)
	Sleep Mode: Press and hold for 2s
	Awake: Press once in Sleep mode
	Color Switch: Press to switch from different color

Installing Your Device

Connect the adapter to the lamp via the DC charging port;
Power on the adapter (the lamp is available to use during charging).

Pairing Your Device with the Govee Home App

What you need:
A Wi-Fi router supporting the 2.4GHz and 802.11 b/g/n bands. 5GHz is not supported.

Download the Govee Home app from the App Store (iOS devices) or Google Play (Android devices).
Turn on the Bluetooth in your smartphone.
Open the app, tap "+" icon in the top right corner and search "H6058".
Tap the device icon and follow the on-screen instructions to complete pairing.

Specifications

Working Voltage	AC 100-240V
Input	12V/1A
Lumen	350lm
Color	RGBWW
Color Temperature	2200K-6500K
Battery Capacity	3350mAh
Regular Battery Life	4 hrs
Charging Duration	4 hrs
Working Temperature	-10° to 45°C (14° to 113°F)

Troubleshooting

Cannot connect to the Govee Home app.

Check if the device is powered on.
Check if Bluetooth on the smartphone is enabled, or try connecting with another smartphone.
When connecting for the first time, ensure the smartphone is near the device.
If the connection error still exists, please delete the connected device from "My Devices" on the app. Reconnect to the Govee Home app by following the instructions provided previously.

How long will the battery last after fully charged?

When powered by the battery, the lamp will automatically turn on energy-saving mode for better battery life.
With the warm white lighting, the battery can last for 4 to 5 hours. It can last longer with colored lighting.

How to check the battery status of the lamp?

You can check the battery status on the Govee Home app after connecting via Bluetooth.

Wi-Fi disconnected or failed to connect?

Check if the device is powered on.
Do not skip the Wi-Fi connection steps during the device pairing process.
Ensure your Wi-Fi router is 2.4GHz (5GHz is not supported).
Ensure you entered the correct Wi-Fi password during the Wi-Fi set up process.
Try using another smartphone to pair with the device to ensure your network is working properly.
Shorten the distance between the device and the Wi-Fi router to less than 50 inches, then reconnect.

Cannot connect to Alexa or Google Assistant.

Ensure the Wi-Fi connection is stable and working properly.
Go to "User Guide" on the app Settings page to pair the device again.

Can multiple users control one device?

Each device can only be controlled by one account.
If multiple users want to manage the same device, ensure they all use the same account.

When disposing of secondary cells or batteries, keep cells or batteries of different electrochemical systems separate from each other.
Be aware discharged battery may cause fire or smoke, tape the terminals to insulate them

Risk of explosion if the battery is replaced by an incorrect type.

The batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
Extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.