Program Timer Operation - Mitsubishi SKM15ZSP-W User Manual

PROGRAM TIMER operation

■ The timer operations of the combination of ON and OFF TIMER. Once this has been set the timer operations will be repeated at the same
time every day unless the ON/OFF button is pressed.
Comfort Start-up
In ON TIMER operation, the unit starts the operation a little earlier, so
that the room can approach optimum temperature at ON time. This is
called "Comfort start-up".
Mechanism
The room temperature is
checked 60 minutes before
the ON time. Depending on
the temperature at that time,
the operation starts 5 to 60
minutes before the timer is at
ON.
The function is available
for both COOL and HEAT
operation mode (including
AUTO). It does not work for
DRY and FAN mode.
Example: Present time is 21:00. The air-conditioner running.
1
2
Changing of set time
Set a new time by using the OFF TIMER or ON TIMER button.
How to cancel
Press the CANCEL or ON/OFF button to turn off the timer display.
In COOL operation
(Stop) Operation starts
(Operation)
Set temperature
Check the room Set time
temp. 60 minutes
before.
When it is preferred to stop at 22:30, and then start operation at 8:00, near the set
temperature.
OFF TIMER operation setting
Set by the procedures on page 14.
ON TIMER operation setting
Set by the procedures on page 15.
Timer light (yellow) on the unit will light when the setting is completed.
■
The set time will be displayed on the remote control. The display will change
depending on the operational status.
The air-conditioner stopping.
First the air-conditioner starts running with ON TIMER.
After the air-conditioner stops running with OFF TIMER.
The air-conditioner running.
First the air-conditioner stops running with OFF TIMER.
After the air-conditioner starts running with ON TIMER.
When SLEEP TIMER is selected, the set temperature is automatically
adjusted after a while, ensuring that the room is not too cold during
cooling or too warm during heating.
COOL operation
+1.0 °C
Set temperature
-1.0 °C
Set time
1 hour
EN-16
Set to
Set to
SLEEP TIMER
HEAT operation
Set temperature
-1.0 °C
-2.0 °C
-3.0 °C
-6.0 °C
Set time
2 hour
30 minutes
1 hour 2 hour