Maintenance - Servicing – Cutting Piston
WARNING – Never service the tool whilst
connected to a pressurised air line
Remove the Banjo bolt and hose from the top
Remove the M4 Capscrews (7x) and the
Remove the Piston assembly from the Cutting
Clean and grease the Cutting piston, Piston
*Reassemble tool as reverse of disassembly*
For maintenance of Pneumatic Nutrunner,
please refer to manufacturers manual
w w w.h clfaste ne rs . com
5
of the Cutting piston.
6
Cutting cylinder.
7
cylinder.
8
shaft and DU bearing.
3.1