Advertisement
Continuous Tightening Tool - Operation
Pull band tight by hand, making sure teeth are
SM-FT-3000-32 tool with trigger operation
shown for reference. All other tool variants
have a button to operate the tool
Insert tool onto band, whilst holding down
trigger – The tool will tighten the band and then
*Keep trigger / button held down*
SM-FT-3000-32 Shown for reference (Trigger)
WARNING – To avoid trapping of fingers,
keep both hands on the tool while the strap is
*Keep trigger / button held down*
SM-FT-3000-32 Shown for reference (Trigger)
Press the cutting button for 2 seconds
or until the blade has completely cut
*Keep trigger / button held down*
SM-FT-3000-32 Shown for reference (Trigger)
Once the band is cut, release the Cutting
Button – The tool will eject the excess length of
Smart
Band assembly complete
®
w w w.h clfaste ne rs . com
5
fully engaged with band
6
stall
being tightened
7
through the band
8
band
2.3
CUT BUTTON
TRIGGER
Advertisement
