Advertisement
Your attention is drawn to the following:
HCL warrants that a new HCL banding tool will operate per functional specifications for a period of sixty (60) days
after the date of shipment to the owners place of business. Normal wearing parts, as outlined in the Operations,
Parts & Safety manual, are also covered by a sixty (60) day warranty unless, in HCL's judgement, these parts have
been subjected to abnormal or extreme usage. HCL's sole liability hereunder will be to repair or replace, without
charge, F.O.B. HCL, Bath UK, any tool which proves to not operate per functional specifications within the stated
period. HCL reserves the right to replace any tool which proves not to operate per functional specifications
with a new or like-new tool of the same model, if in HCL's judgement such replacement is appropriate. Any new
replacement or like new replacement tool provided to an owner will carry a full sixty (60) day warranty. Any warranty
repaired tool will carry a warranty for the balance of time remaining on the initial sixty (60) day warranty. This
warranty will be extended to compensate for the time the tool is in HCL's possession for warranty repairs.
This warranty is void as to any tool which has been:
a) subjected to mis-use, misapplication, accident damage, or repaired with other than genuine HCL
replacement parts.
b) improperly maintained, or adjusted, or damaged in transit or handling.
c) used with improperly filtered, regulated, unlubricated air.
d) in HCL's opinion, altered in a way that affects or detracts from the performance of the tool.
HCL MAKES NO WARRANTY, EXPRESSED OR IMPLIED, RELATING TO MERCHANTABILITY, FITNESS OR
OTHERWISE EXCEPT AS STATED ABOVE AND HCL'S LIABILITY AS ASSUMED ABOVE IS IN LIEU OF ALL OTHERS
ARISING OUT OF OR IN CONNECTION WITH THE USE AND PERFORMANCE OF THE TOOL. IT IS EXPRESSLY
UNDERSTOOD THAT HCL SHALL IN NO EVENT BE LIABLE FOR ANY INDIRECT OR CONSEQUENTIAL DAMAGES
INCLUDING, BUT NOT LIMITED TO, DAMAGES WHICH MAY ARISE FROM LOSS OF ANTICIPATED PROFITS OR
PRODUCTION, SPOILAGE OF MATERIALS, INCREASED COSTS OF OPERATION OR OTHERWISE.
Considerable effort has been made to ensure that this product conforms to our high quality standards. However, should you
experience any difficulties, please contact your Sales representative providing samples and the serial code specified on the tool.
HCL – UK & Rest of the World
Tel: +44 (0)1761 417714
Fax: +44 (0)1761 417710
Email: sales@hcl-clamping.co.uk
Visit www.hclfasteners.com to view our complete range of products.
November 2020
©HCL Fasteners. All Rights Reserved.
HCL – North America
Tel: 281-717-1145
Fax: 281-717-1146
Email: sales@hcl-clamping.com
Advertisement
