Scene Management - RGBlink Q16pro User Manual

If choose BLACK Key, pushing this button will black out selected layer.
Software Version: check comm board version, input module version and output module version.
Network Setting: Mac address and DHCP ON/OFF, IP Address, Subnet Mask, Gateway setting take effect after the
device is rebooted.
Fan Speed: Adjust the speed via button. Users can also turn on Auto Control for automatic adjustment of fan
speed.
Language 语言: Users can switch language here. English or Chinese available.
Factory Reset: If Factory Reset is selected, the interface will show warning, confirm by pushing knob, cancel by
pushing any other key.

3.3.5 Scene Management

Push MENU, rotate the knob and select <Scene Management>.
Fade Time：0.1S~10.0S. Set fade in fade out time for scene switching by rotating knob.
Save To: Save the scene to SCENE 1-16.
Load From
Load saved scene from SCENE 1-16.
Q16pro
Fade Time
Save To
Load From
Save To
-＞SCENE 5
Button on is ready to recall
Button flashes means current scene
Load From
-＞SCENE 5
Button on is ready to recall
Button flashes means current scene
User Manual
1.0S
>>
>>
19