Table of Contents
Advertisement
Available languages
Available languages
Operating instructions
Installation
1. Unpack the fan and place it on a firm, flat surface.
2. Adjust the fan head to the desired angle.
3. Plug the power cord into a 230 V electrical outlet.
Remote control
There is a practical holder on the back of the fan to keep the remote control when it is
not in use.
Battery replacement
1. Squeeze in the catch on the side of the battery
holder drawer to release it and slide it out of
the remote control.
2. Insert a new CR2032 battery. Make sure
the polarity is correct.
3. Slide the battery holder back into the remote control.
Functions
On/off
[
]
Short-press
[
] to switch the fan on/off.
Adjusting the fan speed
With the fan switched on, turn the dial (12) or use the remote control buttons (15) to
select the desired speed. The current speed level (1−24) will appear on the display.
Fan head oscillation
Short-press [
] to switch the fan head oscillation on/off.
Switch between fan modes (Remote control)
Short-press
[
] to toggle between Natural breeze, Sleep mode and Normal
mode.
[
]
[
]
7
[
]
Advertisement
Table of Contents
