Cleaning And Care - Clas Ohlson DF-EF0821H Manual

Natural breeze
[
In the mode the speed of the fan varies automatically to simulate a natural breeze.
The strength of the breeze can be set to one of three levels (8-16-24).
Control panel: Short-press
(12) to change the breeze strength level.
Remote control: Short-press
Use the buttons (15) to change the breeze strength level.
Sleep mode
[ ]
In this mode the fan speed gradually decreases every 30 minutes from
the chosen starting speed (1−6) down to the lowest fan speed (1).
Control panel: Short-press
Use the dial (12) to choose the starting speed of the fan.
Remote control: Short-press
Use the buttons (15) to choose the starting speed of the fan.
Timer
[ ]
The timer function can be used to set a time delay after which the fan will automatically
switch off. The set time (0−12 hours) will appear on the display. (If the timer time is set
to 0, the timer function deactivated).
Control panel: Short-press
adjust the time.
Remote control: Use the buttons (13) to increase/decrease the time.
Ionisation function
Short-press [ ] to switch the ionisation function on/off.
Information about ionisation
The ionisation function improves the quality of indoor air by the fan charging small
particles of dust, germs and allergens with negative ions as they pass through it.
Instead of whirling around the room, the negatively ionised particles attach more easily
to surfaces such as walls and floors. (To prevent these particles from later becoming
free and entering air circulation again, the walls will need to be wiped with a damp
cloth regularly.)

Cleaning and care

Warning: Unplug the power cord before cleaning the product.
Use a soft moist cloth to clean the product. Use a mild detergent,
never use solvents or strong, abrasive cleaning agents.
]
[ ] to switch the natural breeze mode on/off. Use the dial
[ ] repeatedly to select Natural breeze.
[ ] to switch the sleep mode on/off.
[ ] repeatedly to select Sleep mode.
[ ] to switch the timer mode on/off. Turn the dial (12) to
[ ]
8