OVERVIEW Thank you for using our product, this unit is designed for indoor using, it s widel used for stage, building, disco, etc. as high power led effects lighting, this unit can be operated as a single unit or multiple units for large applications. Direct input of DMX512 signal to unit to allow it controlled by any DMX controller, powerful internal programs and friendly and convenient operation interface allows customers to program freely to any different lighting project requirements for installation or showing.
1. Product Introduction 1.1. Product Feature 2 kinds of running model External control mode (Slave model) DMX 512 controller control(2 kinds channel modes) Master/salve model control (auto match the signal from controller and the Master light, no need to set by menu) static mode (Master model) It can fix any color without the controller ,also work this color with strobe Non-linear dimmer and linear dimmer...
2. Main Menu 2.1. Main Menu Reverse Display Running Status Vice Menu Button 2.2. Operation Status Mode Display Description DMX Mode Dxxx D stand for DMX mode Temperature M-WP M stand for stand Master, WP stand for White Mode Point...
Page 5
3. DMX Menu & Channel data 3.1 DMX menu Enter DMX mode: 1. If you are in DMX mode,the main menu will turn into DMX menu automatically after 5 seconds 2. Menu of DMX address (DMX mode) will turn into DMX menu automatically after 5 seconds Quit DMX mode 1.
3.2 Channel data Channel Data Function Mark Channel 2 data mnemonic Screw Mode Knob 1 is for dimmer 1~255 Dimmer 0~11 3000K Color temperature 1 8 = 1*8 Totally 31 kinds of color temperature. 12~19 3100K Each 8 data is for a 16 = 2*8 Quick color: If you need color temperature...
4.3 Setting Menu State Option Mark Touch Screen Calibration Touch Screen Calibration Dimmer Frequency Choose 2700K dimmer frequency …… Increase decrease with data of 100K 6500K Dimmer Curve Choose Standard dimmer curve Incandescent Linear Quick Over Temperature Set the protect 45~95 Increase decrease...
SAFETY WARNING 1. Warning ﹡ Every person involved with the installation , operation and maintenance of this device has to be qualified . ﹡ User must follow the instructions of this manual ﹡ Unqualified person can not open the housing cover and operate the device , or the dealer will not accept liability for any resulting defects or problems.
Need help?
Do you have a question about the SPKLEKO600 and is the answer not in the manual?
Questions and answers