Related Manuals for Gamma LED Leko 200
Summary of Contents for Gamma LED Leko 200
- Page 1 LED Leko 200 Cool White and Warm White 200w LED Spot User Manual LED Leko 200 CW/WW – GAMMA LED Vision Page 1 of 12...
-
Page 2: Table Of Contents
2. Setup and Operation............................6 Using the LCD Menu and Buttons......................6 DMX Setup................................7 DMX Basics...............................7 DMX Wiring..............................7 DMX Modes and Configuration......................8 3. Maintenance...............................10 Routine Maintenance............................10 Troubleshooting Problems...........................10 4. Technical Specifications..........................11 Photometric Reports............................12 LED Leko 200 CW/WW – GAMMA LED Vision Page 2 of 12... -
Page 3: Introduction And Setup
• Mounting and Operation Use a clamp rated for the full weight of the LED Leko 200 to hang the fixture from the mount(s) on the fixture’s yoke. As an added safety measure be sure to attached at least one properly rated safety cable to the fixture using on of the safety cable rigging point integrated in the base assembly or on the yoke. - Page 4 ∙Warranty is voided if there are any malfunctions from not following the user manual while operating or any hazardous operation, like shock short circuit, electronic shock, lamp broken, etc. LED Leko 200 CW/WW – GAMMA LED Vision Page 4 of 12...
-
Page 5: Customer Support
Customer Support WARRANTY POLICY GAMMA LED Vision warrants its products for the periods set below from the date of purchase to be free of manufacturer and workmanship defects. Warranty does not cover normal wear and tear caused by force, negligence or misuse of products. GAMMA LED Vision is not responsible for any damages or injury caused by misuse or improper handling of the products and in accordance with instructions and specifications of manual. -
Page 6: Setup And Operation
“*” Reset Press “ENTER” to confirm password. It will Pwd:**** revert to default se ng once the password is correct, otherwise it will delete all the “*” LED Leko 200 CW/WW – GAMMA LED Vision Page 6 of 12... -
Page 7: Dmx Setup
1, 2, and 3 are used. The cable should be a 2 conductor, shielded cable of at least 110 ohms resistance. Microphone cable is not DMX cable. LED Leko 200 CW/WW – GAMMA LED Vision Page 7 of 12... -
Page 8: Dmx Modes And Configuration
DMX Modes and Configuration The LED Leko 200 has multiple DMX modes, sometimes called “personalities”, “profiles”, or as we will use here “modes”. In general, modes with more DMX channels offer a greater level of control or options but take up more of your output channels on your lighting console or software. - Page 9 0-255 Dimmer Curve? 0-10 Default Delay of Dimmer (Softening) 11-15 No Fade Softening 16-255 Shortest to Longest Fade Softening Strobe 0-10 No Strobe 11-255 Strobe, Slow to Fast LED Leko 200 CW/WW – GAMMA LED Vision Page 9 of 12...
-
Page 10: Maintenance
Plug the light directly into the DMX controller with a cable that you know is good. • Unplug all other lights – does it work? Try to use another DMX controller. • LED Leko 200 CW/WW – GAMMA LED Vision Page 10 of 12... -
Page 11: Technical Specifications
• -30~40°C Max ambient temperature • IP20 protection rating • Max. Power: 200W • Dimensions: 640(D)*186(W)*394(H)mm • Packing Size: 300(D)*730(W)*310(H)mm • Net Weight: 7.13kg • Gross Weight: 9kg LED Leko 200 CW/WW – GAMMA LED Vision Page 11 of 12... -
Page 12: Photometric Reports
Photometric Reports Photometric Data – 26 Degree FC at Center 49.7 25.5 LED Leko 200 CW/WW – GAMMA LED Vision Page 12 of 12...