Related Manuals for Gamma Cove LED 200
Summary of Contents for Gamma Cove LED 200
- Page 1 Cove LED 200 Cool White & Warm White LED Par/Wash User Manual COVE LED 200 CW/WW – GAMMA LED Vision Page 1 of 12...
-
Page 2: Table Of Contents
A4CH................................9 A6CH................................9 b4CH..............................10 b6CH..............................10 3. Maintenance...............................11 Routine Maintenance..........................11 Troubleshooting Problems......................11 A. The unit does not work:......................11 B. Not Responding to the DMX Controller................11 4. Technical Specifications..........................12 Photometric Reports..........................12 COVE LED 200 CW/WW – GAMMA LED Vision Page 2 of 12... -
Page 3: Introduction And Setup
Introduction and Setup Unpacking and In the Box Thank you for choosing our Cove LED 200. For your own safety, please read this manual before installing or using the device. This manual covers the important information on installation and applications. Please install and operate the fixture with following instructions. -
Page 4: Customer Support
Customer Support WARRANTY POLICY GAMMA LED Vision warrants its products for the periods set below from the date of purchase to be free of manufacturer and workmanship defects. Warranty does not cover normal wear and tear caused by force, negligence or misuse of products. GAMMA LED Vision is not responsible for any damages or injury caused by misuse or improper handling of the products and in accordance with instructions and specifications of manual. - Page 5 Please visit WWW.GAMMALEDVISON.COM for complete Limited Warranty terms and contact information. COVE LED 200 CW/WW – GAMMA LED Vision Page 5 of 12...
-
Page 6: Setup And Operation
Chase Mode (00-99) CC00 Fade Mode (00-99) CP00 dE00 Pulse Mode (00-99) BebE Sound-Active Mode Y255 Cool White (000—255) o255 Warm White 000—255) LCD Display on/off when inactive. On/Off COVE LED 200 CW/WW – GAMMA LED Vision Page 6 of 12... -
Page 7: Dmx Basics
1, 2, and 3 are used. The cable should be a 2 conductor, shielded cable of at least 110 ohms resistance. Microphone cable is not DMX cable. Please refer to the diagram below: COVE LED 200 CW/WW – GAMMA LED Vision Page 7 of 12... - Page 8 XLR plug with a 120 Ω resistor connected between pins 2 and 3, which is then plugged into the output XLR socket of the last fixture in the chain. Please see illustrations below: COVE LED 200 CW/WW – GAMMA LED Vision Page 8 of 12...
-
Page 9: Dmx Modes And Configuration
DMX Modes and Configuration The Cove LED 200 has multiple DMX modes, sometimes called “personalities”, “profiles”, or as we will use here “modes”. In general, modes with more DMX channels offer a greater level of control or options but take up more of your output channels on your lighting console or software. -
Page 10: B4Ch
Macro Speed, Slow to Fast Macros 0-50 DMX Control 51-100 – Chase 101-150 – Fade 151-200 – Color Pulse 201-255 – Sound-Active Mode Macro Speed Macro Speed, Slow to Fast COVE LED 200 CW/WW – GAMMA LED Vision Page 10 of 12... -
Page 11: Maintenance
Plug the light directly into the DMX controller with a cable that you know is good. • Unplug all other lights – does it work? Try to use another DMX controller. • COVE LED 200 CW/WW – GAMMA LED Vision Page 11 of 12... -
Page 12: Technical Specifications
IP Grade: IP20 Weight: 6.0kg Photometric Reports Distance FC at Center, Full White FC at Center, Warm White FC at Center, Cool White 1223 39.4 19.7 19.7 10.6 11.7 COVE LED 200 CW/WW – GAMMA LED Vision Page 12 of 12...