Related Manuals for Gamma TX5 Spot
Summary of Contents for Gamma TX5 Spot
- Page 1 TX5 Spot 250w Spot Moving Head with Zoom User Manual TX5 Spot – GAMMA LED Vision Page 1 of 21...
-
Page 2: Table Of Contents
Table of Contents 1. Introduction and Setup............................3 2. Setup and Operation............................11 DMX Basics...............................12 DMX Wiring..............................12 3. Maintenance................................18 Routine Maintenance...........................18 Troubleshooting Problems........................19 4. Technical Specifications............................20 TX5 Spot – GAMMA LED Vision Page 2 of 21... -
Page 3: Introduction And Setup
Introduction and Setup Unpacking and In the Box Thank you for choosing our TX5 Spot moving head light. For your own safety, please read this manual before installing or using the device. This manual covers the important information on installation and applications. Please install and operate the fixture with following instructions. - Page 4 “omega bracket”. As an added safety measure be sure to attached at least one properly rated safety cable to the fixture using on of the safety cable rigging point integrated in the base assembly. TX5 Spot – GAMMA LED Vision Page 4 of 21...
- Page 5 Regardless of the rigging option you choose for your TX5 Spot, always be sure to secure your fixture with a safety cable. The fixture providers a built-in rigging point for a safety cable on the hanging bracket as illustrated above. Be sure to only use the designated rigging point for the safety cable and never secure a safety cable to a carrying handle.
- Page 6 Colorful LCD display Efficient low noise fan cooling system PowerCon IN/OUT 3-pin XLR connectors IN/OUT Two 1/4 turn fastening Omega Clamps IP 20 protection rating TX5 Spot – GAMMA LED Vision Page 6 of 21...
- Page 7 The TX5 features 2 gobo wheels – 1 fixed and 1 rotating. The rotating gobo wheel also features interchangeable gobos. Fixed Gobo Wheel (Gobo Wheel 1) Rotating Gobo Wheel (Gobo Wheel 2) TX5 Spot – GAMMA LED Vision Page 7 of 21...
- Page 8 If the external flexible cable or cord of this fixture is damaged, it shall be exclusively replaced by the manufacturer of his service agent or a similar qualified person in order to avoid a hazard. TX5 Spot – GAMMA LED Vision Page 8 of 21...
- Page 9 Don’t expose the fixture in overheating, moisture or environments with too much dust when installing it. And don’t lay any power cables on the floor. Or it might cause electronics shock to the people. TX5 Spot – GAMMA LED Vision Page 9 of 21...
- Page 10 Customer Support WARRANTY POLICY GAMMA LED Vision warrants its products for the periods set below from the date of purchase to be free of manufacturer and workmanship defects. Warranty does not cover normal wear and tear caused by force, negligence or misuse of products. GAMMA LED Vision is not responsible for any damages or injury caused by misuse or improper handling of the products and in accordance with instructions and specifications of manual.
-
Page 11: Setup And Operation
2. Setup and Operation Using the LCD Menu and Buttons Menu Operation TX5 Spot – GAMMA LED Vision Page 11 of 21... -
Page 12: Dmx Basics
DMX Cables can be 3-pin or 5-pin. These use the same type of data, and in the 5-pin only pins 1, 2, and 3 are used. The cable should be a 2 conductor, shielded cable of at least 110 ohms resistance. Microphone cable is not DMX cable. TX5 Spot – GAMMA LED Vision Page 12 of 21... - Page 13 DMX universe. View the DMX mode charts below to find the mode that best suits your needs. TX5 Spot – GAMMA LED Vision Page 13 of 21...
- Page 14 CCW scroll, slow to fast Color 0-10 No Function Indexing 11-209 Color Index (Allows for variable splits between any 2 colors on the wheel) Gobo Wheel Open 1 – Static 7-13 Gobo 1 TX5 Spot – GAMMA LED Vision Page 14 of 21...
- Page 15 16-31 Gobo 1 White 32-47 Gobo 2 48-63 Gobo 3 64-79 Gobo 4 80-95 Gobo 5 96-111 Gobo 6 112-127 Gobo 7 128-191 Gobo Rotate CW from Slow to Fast TX5 Spot – GAMMA LED Vision Page 15 of 21...
- Page 16 216-255 Prism Rotate CCW, Slow to Fast Frost Open 5-127 Variable Frost 128-191 Frost Shake 192-255 Frost Effect Automatic No Function Programs 8-131 Auto Programs and Reset 132-249 Sound-Active Mode TX5 Spot – GAMMA LED Vision Page 16 of 21...
- Page 17 250-253 Reset 254-255 No Function TX5 Spot – GAMMA LED Vision Page 17 of 21...
-
Page 18: Maintenance
We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol solvents. There are no serviceable parts inside the device. Please refer to the instructions under “Installation instructions”. TX5 Spot – GAMMA LED Vision Page 18 of 21... -
Page 19: Troubleshooting Problems
Plug the light directly into the DMX controller with a cable that you know is good. Unplug all other lights – does it work? Try to use another DMX controller. TX5 Spot – GAMMA LED Vision Page 19 of 21... -
Page 20: Technical Specifications
Control Signal: DMX 512, master-slave and sound activated or auto operation Control Channel: 16/18 DMX Channels USITT DMX-512 Power Consumption: 250w Dimensions: 270(D)*270(W)*470(H)mm Packaging Size: 305(D)*305(W)*500(H)mm Net Weight: 13.5kg TX5 Spot – GAMMA LED Vision Page 20 of 21... - Page 21 Photometric Data TX5 Spot – GAMMA LED Vision Page 21 of 21...
Need help?
Do you have a question about the TX5 Spot and is the answer not in the manual?
Questions and answers