Mitsubishi Electric FREQROL HC Instruction Manual page 76

3) Identification of the reactor 1 (FR-HCL01) and reactor 2 (FR-HCL02)
Each reactor has a rating plate. Connect the reactors 1 and 2 carefully. If they are connected in a wrong sequence,
they will be hot and it will be hazardous.
<Data on Rating Plates>
Reactor 1 (FR-HCL01)
AC REACTOR
TYPE
BKO-CA
SERIAL
FR-HCL01
Note: Check this "TYPE" to discriminate between reactors 1 and 2.
Rating plate
Reactor 2 (FR-HCL02)
(Note)
TYPE
BKO-CA
SERIAL
- 63 -
AC REACTOR
FR-HCL02