Charging Your Boss - Hover-1 PRO Series Owner's Manual

WARNING
Failure to follow the safety precautions listed below could lead to serious
bodily injury and/or death.
• Do not attempt to modify, change, or replace your battery.
Do not use your device if the battery begins to emit odor, overheats, or begins to
•
leak.
• Do not touch any leaking materials or breathe fumes emitted.
• Do not allow children or animals to touch the battery.
•
The battery contains dangerous substances. Do not open the battery or insert
anything into the battery.
•
Do not attempt to charge the device if the battery has discharge or emits any
substances. In that case, immediately distance yourself from the battery in case
of fire or explosion.
WARNING
SEEK IMMEDIATE MEDICAL ASSISTANCE IF YOU ARE EXPOSED TO ANY
SUBSTANCE THAT IS EMITTED FROM THE BATTERY.
35

CHARGING YOUR BOSS

•
Ensure that the charging port is clean and dry.
• Make sure that there is no dust, debris or dirt inside the port.
• Plug the charger into a grounded wall outlet.
•
Connect the cable with the power supply.
• Align and connect the 1-pin charging cable into the charging port of the Boss
E-Scooter (DO NOT FORCE OR BEND THE CHARGING CABLE AS IT MAY CAUSE
THE PRONGS TO BEND OR BREAK).
•
The charging indicator light on the charger itself should change to RED,
indicating that your device is now being charged.
•
When the red indicator light on your charger changes to green, then your device
is fully charged.
•
After fully charging your Boss, unplug the charger from your device and from the
power outlet.
DANGER
Only use the included charging cable and charger to charge your Boss.
Using any unauthorized charger may damage your Boss.
36