Table of Contents
Advertisement
1.
Overview
Before using this device, carefully read all instructions for use.
The CanarE System includes three components as shown in Figure 1 below:
•
CanarE (wearable device) with Straps (not shown)
CanarE Charger
•
•
Clinic Cart
It is intended to be used in conjunction with the Clinic Base Station System, specifically with the
following subsystems:
Clinic Base Station
•
•
Clinic PC and Application
The CanarE System is intended to provide objective kinematic data on a patient's knee function
before or after total knee arthroplasty (TKA). This system produces kinematic data intended as
an adjunct to the standard of care as directed by the physician. It also collects the patient
kinematic data from its internal motion sensors (identical to the CTE implant). When queried by
the Clinic Base Station, it transmits the patient kinematic data to the Clinic Base Station. The
Clinic Base Station, in turn, uploads the data to the Clinic Laptop when connected. Next, that
data is uploaded to the Canary Cloud Data Management Platform ("Cloud"). Figure 2 provides a
schematic overview of the system's components and interfaces.
Page | 4
Figure 1. CanarE System Components
Instructions for Use
Rev. 4
CanarE System
Advertisement
Table of Contents
