Using The Clinic Cart; Clinic Laptop Placement And Power Supply; Clinic Base Station Placement And Power Supply - Canary CanarE System Instructions For Use Manual

Table of Contents

Advertisement

LED Status
Constant Green
Flashing Green
Flashing Orange
Constant
Orange
Remove the CanarE from the patient's knee when testing is complete.
Dispose of the Straps or self-adhesive tape.
CAUTION
Do not reuse the Straps; dispose after use.
8.4.

Using the Clinic Cart

Assemble the Clinic Cart following the instructions provided in its packaging (K03-
CRT-800000).
Connect the Cart's power cord to a standard outlet power supply.
NOTE: The Cart's power supplies will not be active unless the Cart's power cord is
connected to standard outlet power supply.
The Cart can transport components by releasing the wheel's brakes, and then
pushing it to the desired location. Once in the desired location, set the brakes to
keep the Cart from moving.
8.4.1.

Clinic Laptop Placement and Power Supply

Place the Clinic Laptop in the desired location on the Clinic Cart's top flat service.
Connect the Clinic Laptop to the Laptop Power Supply as illustrated in Figure 11.
8.4.2.

Clinic Base Station Placement and Power Supply

Place the Clinic Base Station in the holder on the Clinic Cart's top flat service as
illustrated in Figure 11.
Connect the Clinic Base Station to the charging cord as illustrated in Figure 11.
NOTE: The Clinic Base Station will be connected to the Clinic Laptop for use if both
are connected to a power source on the Clinic Cart and powered on.
Page | 20
Table 5: CanarE LED Active Status
Definition
Active: CanarE battery status is between 85% -100% charged
Active: CanarE battery status is between 40-84% charged
Active: CanarE battery status is between 20-39% charged
Active: CanarE battery status is between 0-19% charged
Instructions for Use
Rev. 4
CanarE System

Advertisement

Table of Contents
loading

Table of Contents