Troubleshooting - Canary CanarE System Instructions For Use Manual

14. Troubleshooting

Table 6 lists steps that will generally solve issues encountered on the CanarE System. If the
problem persists, contact Canary Medical Support.
Issue
LED is not on while CanarE is charging
LED on the CanarE is yellow
Clinic Cart is not providing power
Page | 28
Table 6: CanarE System Troubleshooting
Troubleshooting Steps
Make sure the CanarE Charger is connected
to power.
If using the Clinic Cart power source, make
sure the Cart is connected to a power outlet.
The LED has a timeout if it has been in the
CanarE Charger too long. Remove the
CanarE from the Charger and return it to the
Charger to reset the device.
Indicates a device fault. Place the CanarE in
the CanarE Charger, remove, and then return
to the CanarE Charger to reset the device.
Make sure the Clinic Cart is connected to a
power outlet.
Make sure the power cords are properly
connected to the Clinic Cart power supplies.
Instructions for Use
Rev. 4
CanarE System