Sony LMD-3251MT Interface Manual For Programmers page 31

Function Command Name
Select Config Data
(2FH)
Picture Config (30H)
Multi Display (31H)
BKMDVI SET
(3DH)
3D Function (3EH)
Command
STATset SCANMODE NATIVE
STATset ASPECT 4BY3
STATset ASPECT 16BY9
STATset EXTSYNC OFF
STATset EXTSYNC ON
STATset AUTOSYNCDET OFF
STATset AUTOSYNCDET ON
STATset SDPIXEL CVBSYC712702
STATset SDPIXEL CVBSYC720720
STATset SDPIXEL RGBCOMP712702
STATset SDPIXEL RGBCOMP720720
STATset MULTIDISP DISABLE
STATset MULTIDISP ENABLE
STATset MULTIDISP PIP
STATset MULTIDISP SBS
STATset MULTIDISP POP
STATset MULTIDISP CVBS
STATset MULTIDISP YC
STATset MULTIDISP RGB
STATset MULTIDISP COMP
STATset MULTIDISP DVI
STATset MULTIDISP HD15
STATset MULTIDISP OPA1
STATset MULTIDISP OPA2
STATset MULTIDISP OPB1
STATset MULTIDISP OPB2
STATset MULTIDISP VIDEO_WAVE
STATset MULTIDISP POSITION1
STATset MULTIDISP POSITION2
STATset MULTIDISP POSITION3
STATset MULTIDISP POSITION4
STATset MULTIDISP RIGHT
STATset MULTIDISP LEFT
STATset MULTIDISP SIZE1
STATset MULTIDISP SIZE2
STATset EXT5VINON
STATset EXT5VINOFF
STATset EXT5VOUTON
STATset EXT5VOUTOFF
STATset EDIDUPDATESTART
STATset 3DSEL 2D
STATset 3DSEL 3D
Send (Ethernet t Monitor)
Sets the SCAN size to NATIVE.
Sets the aspect ratio to 4:3.
Sets the aspect ratio to 16:9.
Sets the external sync to OFF.
Sets the external sync to ON.
Sets AUTOSYNCDET to OFF.
Sets AUTOSYNCDET to ON.
Sets SD PIXEL MAPPING
COMPOSITE&Y/C to 712 × 483/702 ×
576.
Sets SD PIXEL MAPPING
COMPOSITE&Y/C to 720 × 487/720 ×
576.
Sets SD PIXEL MAPPING RGB/
COMPONENT to 712 × 483/702 × 576.
Sets SD PIXEL MAPPING RGB/
COMPONENT to 720 × 487/720 × 576.
Sets the multi display to OFF.
Sets the multi display to ON.
Sets to PIP mode.
Sets to SIDE BY SIDE mode.
Sets to POP mode.
Sets SUB INPUT DISPLAY to
COMPOSITE.
Sets SUB INPUT DISPLAY to Y/C.
Sets SUB INPUT DISPLAY to RGB.
Sets SUB INPUT DISPLAY to
COMPONENT.
Sets SUB INPUT DISPLAY to DVI.
Sets SUB INPUT DISPLAY to HD15.
Sets SUB INPUT DISPLAY to OPTION A-
1.
Sets SUB INPUT DISPLAY to OPTION A-
2.
Sets SUB INPUT DISPLAY to OPTION B-
1.
Sets SUB INPUT DISPLAY to OPTION B-
2.
Sets SUB INPUT DISPLAY to VIDEO
WAVE.
Sets the position of the sub display to 1.
Sets the position of the sub display to 2.
Sets the position of the sub display to 3.
Sets the position of the sub display to 4.
Sets the position of the frame to RIGHT.
Sets the position of the frame to LEFT.
Sets SUB PICTURE SIZE to 1.
Sets SUB PICTURE SIZE to 2.
Sets external 5 V(DVI-IN) to ON.
Sets external 5 V(DVI-IN) to OFF.
Sets external 5 V(DVI-OUT) to ON.
Sets external 5 V(DVI-OUT) to OFF.
Starts EDID UPDATE.
Selects 2D display.
Selects 3D display.
VMC Command Description
31