Table of Contents
Advertisement
Command
Enter the setting value in [Value] (do not enter [ ].)
Function
Command Name
SDCP (Ethernet
Button CONTROL
Command) V0.2
(20H)
Input Config (21H)
Control Data (23H)
Display Data (24H)
I/P Mode (27H)
Command
INFObutton MENU
INFObutton MENUUP
INFObutton MENUDOWN
INFObutton MENUENT
STATset INPUTSEL CVBS
STATset INPUTSEL YC
STATset INPUTSEL RGB
STATset INPUTSEL COMP
STATset INPUTSEL DVI
STATset INPUTSEL HD15
STATset INPUTSEL OPA1
STATset INPUTSEL OPA2
STATset INPUTSEL OPB1
STATset INPUTSEL OPB2
STATset WBSEL LOW2
STATset WBSEL LOW
STATset WBSEL HIGH
STATset WBSEL USER
STATset WBSEL USER2
STATset WBSEL USER3
STATset WBSEL USER4
STATset WBSEL USER5
STATset CONTRAST [Value]
STATset APERTURE [Value]
STATset BRIGHTNESS [Value]
STATset PHASE [Value]
STATset CHROMA [Value]
STATset BACKLIGHT [Value]
STATset RESET
STATset PITCH [value]
STATset DOTPHASE [value]
STATset SIZEH [value]
STATset SIZEV [value]
STATset SHIFTH [value]
STATset SHIFTV [value]
STATset MODE0
STATset MODE1
STATset MODE2
Send (Ethernet t Monitor)
Displays the menu.
Moves the menu item upward.
Moves the menu item downward.
Confirms the menu item.
Selects the composite input.
Selects the Y/C input.
Selects the RGB input.
Selects the component input.
Selects the DVI input.
Selects the HD15 input.
Selects the option A-1 input.
Selects the option A-2 input.
Selects the option B-1 input.
Selects t the option B-2 input.
Selects COLOR TEMP D56.
Selects COLOR TEMP D65.
Selects COLOR TEMP D93.
Selects COLOR TEMP USER1.
Selects COLOR TEMP USER2.
Selects COLOR TEMP USER3.
Selects COLOR TEMP USER4.
Selects COLOR TEMP USER5.
Sets the contrast level.
Adjustable range is 0 to 100.
Sets the aperture level.
Adjustable range is 0 to 6.
Sets the brightness level.
Adjustable range is 0 to 100.
Sets the phase level.
Adjustable range is 0 to 100.
Sets the chroma level.
Adjustable range is 0 to 100.
Sets the backlight level.
Adjustable range is 0 to 5.
Resets the setting to the factory setting.
Sets the pitch.
Adjustable range is 0 to 32.
Sets the dot phase.
Adjustable range is 0 to 63.
Sets the H size.
Adjustable range is -100 to +100.
Sets the V size.
Adjustable range is -100 to +100.
Sets the H shift.
Adjustable range varies according to the
input signal (see page 34).
Sets the V shift.
Adjustable range varies according to the
input signal (see page 34).
Sets I/P MODE to INTER-FIELD.
Sets I/P MODE to FIELD MERGE.
Sets I/P MODE to LINE DOUBLER.
VMC Command Description
29
Advertisement
Table of Contents
