Device Connection - Wiznet WizFi360-CON Getting Started

#Device connection

After connecting hardware, connect WizFi360-EVB-Shield to Desktop or Laptop using USB Cable.
Check COM Port from Device Manager.
If COM port cannot be found in Device manager, check drivers from link below.
Silicon Labs CP210x USB to UART Driver
#AT Commands
#1. Set current WiFi mode (not saved in flash)
AT Command: AT+CWMODE_CUR Syntax:
Type Command
Query AT+CWMODE_CUR?
Set AT+CWMODE_CUR=<mode> OK
Defined values:
Response
+CWMODE:<mode>
OK