Table of Contents
Advertisement
#Code
Update your AP credentials (SSID and password) to connect WizFi360. Serial1 is the serial communicating with Arduino and WizFi360 and
should have the same baud rate as WizFi360. The factory default baud rate for WizFi360 is 115200, and if you have not changed it, enter 115200.
Enter the address of the HTTP server to connect to server. You can enter ip address or domain address. In this case, connect to arduino.cc.
Arduino (WizFi360-EVB-Shield) transmits the following HTML data when Web client connects. If you want to send other data, you can modify
it below.
Advertisement
Table of Contents
