Kubota B2650HSDC Workshop Manual page 303

B2650HSDC, B3350HSDC, WSM
Power Steering Controller
1. Remove the nuts (2).
2. Disconnect the power steering hoses (3) from the power
steering controller (1).
3. Remove the power steering controller mounting bolts (4) from
the stay.
(When reassembling)
• Connect the power steering hoses (3) to the power steering
controller (1) securely.
• If oil leaking from the power steering controller (1) is found,
replace the power steering controller (1). O-ring in the power
steering controller (1) is not supplied as a spare part.
• Align the power steering controller shaft (6) to the universal joint
securely.
Power steering controller
Tightening torque
for hoses
(1) Power Steering Controller
(2) Nut
(3) Power Steering Hose
(4) Power Steering Mounting Bolt
(5) Stay
(6) Power Steering Shaft
6-S6
STEERING
24 to 28 N·m
2.5 to 2.8 kgf·m
17 to 20 lbf·ft
(7) Relief Valve
(8) Adaptor (to Right Cylinder)
(9) Adaptor (to Left Cylinder)
(10) Adaptor (to Hydraulic Pump)
(11) Adaptor (to Oil Cooler)
9Y1210822STS0007US0
KiSC issued 05, 2014 A