Preparing Hot Water For Drinks - UFESA Supreme Barista CE8121 Instruction Manual

4.5. Preparing hot water for drinks)

1. Place a cup underneath the hot water outlet nozzle.
2. Touch the icon to switch the coffee maker on. Wait until automatic
rinsing process is finished.
3. Touch the icon once. Indicator will light up.
4. Touch the icon
to select water quantity to be prepa-
red .
5. Touch the icon . Water preparation will start.
6. During preparation, indicator of the icon
7. Touch the icon to stop preparation at any time.
8. Once preparation process has finished, all the indicators of
the icons will light up permanently.
9. Wait until water stops flowing from the nozzles before removing the cup.
Note: the coffee maker will store the last setting of water volume.
86
will flash.
4.6. Preparing drinks using steam
Steam can be used to froth milk for preparing a capuccino, caffe latte, or for heating up liquids.
1. Place a container underneath the steam outlet nozzle.
2. Touch the icon to switch the coffee maker on. Wait until automatic
rinsing process is finished.
3. Touch the icon Indicator will light up.
4. Touch the icon . Heating process for steam preparation will
start.
5. During preparation, indicator of the icon
6. Touch the icon to stop preparation at any time.
7. Once preparation process has finished, all the indicators of
the icons will light up permanently.
8. Wait until steam stops flowing from the nozzle before removing the container.
Note: if you want to change the amount of steam to be dispensed, please refer to section "Adjusting
user choices"
will flash.
87