User manual 1 Safety Precautions • Servicing shall be carried out only by authorized personnel. • Only authorized spare parts, accessories and consumables shall be used. • The machine is not to be used if industrial chemicals have been used for cleaning. •...
– this will reduce, but not eliminate, the hazard. • Maximum mass of dry cloth: T4900: 50 kg, T41200: 67 kg. • A-weighted emission sound pressure level at working stations: < 70 dB(A).
Warranty will be applicable where the customer has used only genuine spare parts and has performed maintenance in accordance with Electrolux Professional user and maintenance documentation made available in paper or elec- tronic format. Electrolux Professional strongly recommends using Electrolux Professional approved cleaning, rinse and descaling agents to obtain optimal results and maintain product efficiency over time.
User manual 3 Program description Programs for machines with RMC Program Process Textiles P 01 Extra dry Denim P 02 Ready to put away 100% cotton / poly cotton mixture / terry P 03 Ironing dry (5% moisture) Polyester / nylon P 04 Ironing dry (10% moisture) Wool / silk...
User manual 4 Handling 4.1 Operating panel Buttons and symbols P button Reversing Program selection button. Reversing on/off. Not active on coin operated Only on OPL machines. machines. With RMC: When pushing the button during operation, the dis- play shows the residual moisture in the clothes.
User manual 4.2 Load Load the goods into the machine according to recommendations and close the door. Make sure the filter is clean and clean if necessary. Maximum load T4900 45 kg T41200 60 kg 4.3 To start the machine Select program or set the drying time.
User manual Start the machine by pressing the start/stop button. The machine stops automatically when the clothes are dry or when the selected time has expired. 4.4 When program has ended Note! For the best possible drying result it is important to empty the machine as soon as the program has ended. If the machine is not emptied as soon as the program has ended the drum will rotate in short intervals in order to keep the goods from being wrinkled.
User manual Note! Rotating the drum when unloading the machine must only be made by one person. When the machine has been unloaded, turn the tilting knob back into upright position. When the tilting knob is in upright position it is possible to rotate the drum with or without the Sliding door being open by pushing the rotation button.
User manual 6 Maintenance 6.1 General It is the responsibility of the owner of the machine/the laundry manager to make sure that maintenance is periodically performed. Note! Lack of maintenance may deteriorate the performance of the machine and may cause damage to components.
User manual Check the door packing (B) and clean if necessary (use a moist cloth). fig.W01113 Remove any lint and dust around the machine. Clean the door, door glass, door gasket and other external parts. 6.3 Machines with residual moisture control (RMC) At regular basis, wipe off/clean drum and lifters with citric acid (Acidum citricum).
User manual 6.5 Maintenance to be carried out by qualified service personnel Contact qualified service personnel to perform the following maintenance: Once a month: • Steam heated machines: Clean the filter in front of the steam calorifier. After 1600 hours of operation or once a year, whichever comes first: •...
User manual 7 Disposal information 7.1 Disposal of appliance at end of life Before disposing of the machine, make sure to carefully check its physical condition, and in particular any parts of the structure that can give or break during scrapping. The machine’s parts must be disposed of in a differentiated way, according to their different characteristics (e.g.
Page 20
Electrolux Professional AB 341 80 Ljungby, Sweden www.electroluxprofessional.com...
Need help?
Do you have a question about the T4900 and is the answer not in the manual?
Questions and answers