ADTRAN ATLAS User Manual page 92

Appendix A. Troubleshooting
Frame Relay Link is active, but data is not passing.
Potential Cause
DLCI is not active
No data on DLCI
A-2
Verify in the P M
ACKET ANAGER
the DLCI shows active. If the DLCI is listed inactive and the packet
endpoint is configured as User side of UNI, the frame relay network has
not activated this DLCI.
1. Verify in the P
ACKET
that the DLCI shows receive packets. If there are no packets received,
verify that external equipment is configured to transmit data on this
DLCI.
2. Verify in the P
ACKET
mapped.
ATLAS Frame Relay User Manual
Solution
/P E
ACKET NDPNTS
M /P E
ANAGER ACKET NDPNTS
M /P C
ANAGER ACKET NCTS
/P menu that
ERFORMANCE
/P menu
ERFORMANCE
menu that this DLCI is
61200263L1-1.1