Table of Contents
Advertisement
Chapter 6. Frame Relay Configuration Examples
EXAMPLE 8:
Step 1
Step 2
6-20
IP ROUTING USING PPP
Example 8 depicts a typical IP routing situation for a point-to-point link us-
ing PPP (see Figure 6-53). A TSU 100e with a Router Module is at the remote
site. The ATLAS terminates up to a full T1 connection to the peer. To recreate
this example, follow the process discussed below.
ATLAS 800
PLUS
with frame relay upgrade
Server
Figure 6-53. Private Frame Relay Network with Dedicated Backup
From P
M
ACKET
ANAGER
point (see Figure 6-54).
Figure 6-54. Menu for Creating Packet Endpoints
From P
M
ACKET
ANAGER
, configure the authentication parameters for the peer (Rx) and the au-
TION
thentication parameters the peer is going to use to authenticate you (Tx) (see
Figure 6-55).
ATLAS Frame Relay User Manual
T1
/P
E
/C
ACKET
NDPOINTS
ONFIG
/P
E
/C
ACKET
NDPOINTS
ONFIG
Figure 6-55. Menu for Configuring Sublinks
TSU 100e with
router module
, create the packet end-
/C
/A
ONFIG
UTHENTICA
61200263L1-1.1
-
Advertisement
Table of Contents
