Advertisement
Quick Links
MANUAL MODE
To put the wheelchair in manual
mode, push down the yellow
levers located behind each back
wheels. To put back in driving
mode pull the handles upwards.
TRANSFERS
Before transferring in or out of
the
wheelchair, it is important to make
sure
that
these
following
safety
measures are applied.
1.
The wheelchair must be TURNED
OFF before sitting in or standing
up from the wheelchair.
You
must always make sure that all
the lights on the control box are
OFF before transferring in or out
of the wheelchair.
2.
Before standing, the safety belt
must be unfastened.
3.
The footrests must be swung to
the sides in order to free up
space in front of the seat. In or-
der to do this, you must press on
the GREY lever to swing foot-
rests to the sides.
Grey lever
4. You can swing the control box to the
side by pushing the lever underneath
the control box. Pull back the control
box to its original position before oper-
ating the wheelchair.
Contact us...
Technical Aid Services
(514) 487-1891 #273
Constance-Lethbridge
Rehabilitation Center
7005, de Maisonneuve O.
Montreal Québec
H4B 1T3
Q 6000
MOTORIZED WHEELCHAIR
Advertisement
Related Manuals for Pride Mobility Q 6000
Summary of Contents for Pride Mobility Q 6000
- Page 1 To put back in driving up from the wheelchair. mode pull the handles upwards. must always make sure that all Q 6000 the lights on the control box are OFF before transferring in or out of the wheelchair. Before standing, the safety belt must be unfastened.
- Page 2 CHANGING SPEED PROFILES TURNING ON DRIVING WITH THE JOY- DISPLAY FOR BATTERY STICK CHARGE LEVEL To change speed profiles, you To operate the wheelchair, you must push up the lever on the must push up the lever located Wheelchair will advance in the The display for the battery load left side of the control box.
Need help?
Do you have a question about the Q 6000 and is the answer not in the manual?
Questions and answers