Rack Mounting Instructions; Installation Instructions For Rack Mounting Kits; Figure 2.1 Attach Pullout Members To Mount - ILX Lightwave LDM-4616 User Manual

2
C H A P T E R
R M I
ACK OUNTING NSTRUCTIONS

The LDM-4616 Laser Diode Mount was designed to be installed in standard 19"
wide racks using slide rails for easy access. There are two different ILX Lightwav
rack mounting kits for two depths of racks. The RM-141 rack mounting kit is for
racks with 20.5" spacing depth on the rack frame. The RM-142 is for racks with
25% spacing depth on the rack frame.

Installation Instructions for Rack Mounting Kits

Remove the pullout members from both drawer slides by extending the inner most
section to its maximum and then depressing the retaining clip while sliding the
pieces apart. Attach the two pullout members to each side of the LDM-4616 with
the eight 8-32 x 3/16" pan head Phillips screws. See Figure 2.1.

Figure 2.1 Attach Pullout Members to Mount

5
LDM-4616
