Shipping Kit - ILX Lightwave LDM-4616 User Manual

1
C H A P T E R
pin headers. Wiring is provided for controlling the lasers internal thermo-electric
modules as well as laser drive current.
The LDM-4616 mount housing is grounded through pin 3 on the 9-pin D-sub
connector for the Channel 1 current source. The housing tray includes a
grounding receptacle for a wrist strap, as well as a grounded laser tray cover.
Pin 3 of the 9-pin D-sub connector for Channel 1 laser current must be connected to
ground for the mount chassis to be grounded. Standard ILX Lightwave cables and
instruments will have the laser connector pin 3 connected to chassis ground.

Shipping Kit

When you receive your LDM-4616 or LDM-4616DFB Laser Diode Mount, verify
that the following items were included with the shipping kit:
• (1x) 5/64" hex socket wrench
• (1x) 3/32" hex socket wrench
• (1x) 2.5 mm x 2" screwdriver (LDM-4616 only)
• (32x) 2-56 x 3/16" screws
• (16x) metal plugs for front panel holes
• (16x) 9-wire packs for configuring pin headers (LDM-4616 only)
2
 LDM-4616
I N T R O D U C T I O N A N D S P E C I F I C A T I O N S
Product Overview